Masonry Drills. Masonry drill bits,
Metric and standard Sds plus, sds MAX, Splined hammer,
A and B taper, percussion, Standard and Metric masonry drills.
Custom tooling Manufactured in the USA .For all construction or demolition applications.
Concrete percussion hammer core.
Plate and Milling Cutters.metric masonry drill bits-standard and long length. Large diameters and
custom drills made to your specifications.
Specialized custom manufactured masonry drills for all applications.
Long lengths as well as large diameters.
Diamond saw blades /concrete /masonry /tooling.
ENGINEERS AVAILABLE TO ASSIST WITH ALL QUESTIONS.
All pricing below wholesale! Masonry/Concrete tooling.
All American Made!
Special lengths and diameters available weather one or bulk.
Drill bits are made of alloyed tool steel with highest grade carbide tips and are refurbishable.
In today's economy, you deserve better quality and service!
We have every type and style masonry/concrete bit manufactured at rock bottom pricing
Engineers are ready to help you get the tooling you need to get the job done.
Call 407-478-2487 or write us for delivery and price.
American Made - USA!
fractional, decimal, and Metric Masonry drills for all your special needs.
lowest prices and highest quality! Discounts for quantity purchase.
"Advantage Drills Incorporated"
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
Distributors of the highest quality Masonry
SDS Plus, SDS Max, and Spline Hammer Drill Motors.
Hydraulic, Pneumatic, Electric  
Pneumatic - Hydraulic -Electric - drill Motors
Masonry drills manufactured and designed
for rugged heavy duty us for all applications. The specialized
alloyed 4140 through hardened steels and c-2/c-3 carbide
are designed for continuous use in all the hardest masonry concrete materials.
Extra Long and Large Sizes Made.
Drill bits manufactured in fractional metric sizes.
Larger diameter and length tooling custom
manufactured to your needs.
" Masonry Fast Spiral Drills"
masonry/concrete drills
1/8" to 1"dia.
up to 18" lengths.
These drill bits have a proven Fast Spiral Bit design, combined
with a special carbide tip and a tough steel alloy body, allows the
Fast Spiral drill Bit to drill quickly and cleanly using a standard rotary drill motors.
Flute design that allows for less heat buildup, providing the longest bit life possible.
Call or E Mail for pricing.
Phone: (407)478-2487 Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
American Manufactured Masonry Drills.
Uni-Bit
 Ultra heavy duty multi-purpose drill bits.
masonry asphalt, concrete, Granite, brick, block, tile,
marble, slate, fiberglass, steel, iron,
aluminum, wood, and plastic.
1/8" to 1/2" diameters
Titanium-Tungsten-Carbide
These bits is are the best for Granite as well as the hardest materials!
"Hammer Percussion Bits "
(Masonry/Concrete)
1/8" to 1-1/2" diameters: metric sizes also.
(From 2-3/4" to 84"+) lengths
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.)
Straight Shank Hammer percussion masonry drills are designed for use in hard hitting hammer drills
that utilize a 3-jawed, Jacob’s type chuck, feature an extra tough carbide tip that gives outstanding performance
in the roughest masonry drilling applications. The heat-treated and surface hardened alloy body, coupled with
an extra tough percussion carbide tip, is designed to stay sharper longer.
The shank design allows for easy factory sharpening to help extend the life of the bit.
"SDS/PLUS"® Drills
 
(masonry/Concrete)
3/16" to 1-1/8"diameters or(4 mm to 28 mm).
up to 38"+ lengths.
Metric masonry drill sizes 5mm to 66mm (custom diameters and Lengths Mfg.)
The SDS Plus feature the SDS plus versatile Slot Drive System that fits
all rotary hammers that specify an SDS Plus Shank. Positive drive slots deliver maximum drilling torque and maximum hammering
energy for faster masonry asphalt, concrete drilling. We combined the “Ultra Flute”, an asymmetrical spiral
design with the popular SDS Plus Shank to achieve a combination
that makes our the fastest drilling hammer bit of its type!
"SDS/MAX® " Drills
 
(masonry/Concrete)
Designed with Five carbide tips.
3/8" to 1-1/2"diameters and metric.
specials up to 72-1/2 " + lengths.
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.) SDS Max is a masonry Bit that has
a heavy duty slot drive system that is designed to maximize the performance.
SDS Max masonry Drill Bits will fit any rotary hammer that is designed with an SDS Max ® drive system.
has three positive drive slots and two ball retainer slots incorporated into the SDS Max ® shank design.
The design in the SDS Max allows the operator to drill large diameter holes in masonry with ease.
The SDS Max is ® 5/8” diameter or larger and are equipped with a multi-cutter tip design.
" SPLINE DRIVE" Drills "
 
(masonry/Concrete)
3/8" to 1-1/2"diameter standard and metric sizes also,
specials up to 108"+ lengths.
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.)
The Spline Hammer feature a carbide tipped and spline drive. Spline Drive
are held to exacting tolerances to assure perfect fit as well as maximum impact and torque transmission.
Masonry Splined - are rotary/percussion/hammer industrial drills that are milled
from a single piece of steel and are designed with maximum strength to provide maximum life. Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"EXTRA LONG "
(masonry/Concrete)
1/4" to 1-1/2"dia.
FROM 4" UP TO 108" lengths
Metric sizes 5mm to 66mm
(custom manufactured bit diameters and Lengths made.)
Long Masonry Bell Hanger or Installer Bits are used in small wire installation
or fishing wire threw holes that have just been drilled. These masonry installer bits are carbide tipped.
The Bell Hanger are specifically designed for small wire installation applications.
Telephone wire installation, security alarm installation, fire alarm installation, cable wire installation,
data network wire installation, electricians and other professionals. All use these unique carbide tipped installer
Masonry bits to drill holes through walls, studs and other obstacles and then use the unique threw hole,
attaches a wire to the installer bit and fishes the small wire back through the drilled hole with ease.
"Combination Drills / Counter Sink"
Hurricane Shutter Installation anchors (masonry/Concrete)
 
1/4 pilot with 1/2 counter bore 3-1/2" and 5" lengths. Protecting your home, property, business or loved one, take the Guesswork out of Hurricane Shutter Anchors,
Storm Shutter Anchors, and Security Shutter Anchor Installation...Hurricane Anchor Bits are
Combination drill bits designed for masonry anchors. These bits are designed for Masonry Hurricane Shutter Anchors
or Hurricane Anchors and are equipped with a carbide-tipped pilot drill bit, and counter bore, depth gage collar.
Reliable Hurricane Shutter Installation is easy when Hurricane Anchors are set to same depth.
To install hurricane anchors just adjust to counter sinking depth settings. Once the Hurricane Shutter Anchors depth
is adjusted, duplicate holes with exactly the same depth can be quickly drilled, one after another! In just one easy step
Hurricane Shutter Anchors Bits or Hurricane Anchor Bits will repeatedly drill holes for hurricane anchors lead shields,
as well as a small hole to allow clearance for the screw or bolt to pass through.
"Earth Auger "
3" dia. to 30 " + lengths, 1/2 SHANK
Termite bait station installation and soil sampling has never been easier. The Carbide Tipped Earth Auger
is ideal for termite bait station installation or soil sampling. Armed with a pilot and a
auger flute cutter you will drill dozens if not hundreds of holes with this
earth auger. The Earth Auger is equipped with a standard 7/16” Hex shank
that fits both quick change chucks and 1/2” Jacobs® Style Chucks.
Tapcon masonry drill bits
(masonry/Concrete)
5/32",1/4"dia.
Masonry anchor/screw installations.
SDS Plus Tapcon Carbide Tipped Masonry Drill Bits are rotary hammer carbide tipped.
They are specifically designed for use with masonry Tapcon® concrete screw anchors.
Each SDS Plus Masonry Tapcon Carbide Tipped Drill Bit are precisely sized to match
the required tolerances necessary to achieve maximum holding power from self threading concrete screws.
SDS Plus Tapcon Masonry Drill Bits
(masonry/Concrete)
Tapcon carbide tipped masonry drill bits have a 5/16” hex, immediately below the shank, that fits directly
into the concrete screw anchor installation tool. SDS Plus Tapcon - SDS Plus Carbide Tipped
Masonry Drill Bits are designed for use with Tapcon® type anchoring systems that utilize an anchor
screw with a self tapping thread. Constructed of hardened alloy steel,
a close tolerance carbide tip and a SDS-Plus/ Hex style shank, the SDS Plus Tapcon Bit
will provide long life and superior performance. The SDS Plus Tapcon Drill Bits are available
by the piece (Standard Pack) or quantities of 10 per package (Pro-Pack).
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
A TAPER Masonry Drill
B TAPER Masonry Drill
(masonry/Concrete)
Hammer Masonry Drills
(A) Taper drill bit 3/16"to 7/8"dia.
(B) Taper drill bit 7/16" to 1-1/8"dia.
A and B Taper style masonry drill bits are made especially to fit our high quality A Taper and B Taper masonry
drill adapters. The smaller A Taper shanks are intended for bit diameters
from 3/16" to 7/8". B Taper shanks are most effective in large capacity rotary percussion
masonry hammer drills and are available in sizes from 7/16" to 1-1/8" diameters.
Taper masonry hammer drill bits are produced from high grade steel that is heat treated
and tempered to provide the longest drilling life possible. These bits, A Taper and B Taper,
have a asymmetrical spiral flute design, allows for efficient dust removal
and cooler operating temperatures.
"A or B TAPER ADAPTERS"
For SDS and Spline.
(masonry/Concrete)
Advantage Drills provides a complete line of masonry drill bit accessories of taper chuck adapters for A and B Taper
carbide tipped masonry drill bits plus a complete line of Taper carbide tipped masonry drill bits
that fit most types of current production or even discontinued masonry rotary/percussion hammer models.
When A Taper or B Taper Adapters are combined with A or B Taper carbide tipped
masonry drill bits, costs are held to a minimum. The common problem of having too many
carbide tipped masonry drill bits of one size and too few of another is eliminated.
A and B Taper Adapters are produced from high quality alloy steel
and are heat treated for extra long life. A drift pin is provided with each adapter at no charge.
The drift pin is used to remove A or B Taper carbide tipped masonry drill bits from the adapters.
Due to changing models and additions to power tool lines, other A and B Adapters
may be available but are not shown.
Masonry "HAMMER CORE" assembly
(masonry/Concrete)
1"to 6" Diameters
12 And 18 Inch Lengths.
sds-plus, sds-max, spline, standard shank.
Rotary masonry Cores are a carbide tipped core bit used in standard rotary masonry drill motors.
Rotary Bits provide an extremely smooth cutting action and a clean finished hole.
Because of the negative setting of the masonry carbide cutting teeth, Rotary Core Drills
can cut through the toughest and hardest of aggregate in any type of concrete.
The Rotary masonry Core Drill sizes 5/8" Diameter to 1-3/8" Diameter
are milled from a single piece of steel.
Rotary Core masonry drill sizes 1-1/2" Diameter and larger are
manufactured with a replaceable threaded shank.
IMPORTANT NOTE:
The Rotary Core Drill can be used in any 1/2” capacity or larger drill motor equipped
with a three jaw chuck and a rated no-load speed of 400 R.P.M.LOADS. to 1,200 R.P.M.LOADS.
This includes most combination masonry hammer drills.
When using a combination masonry hammer drill ensure the selector switch is in the rotary only position!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"Hard Head "Masonry Drill Bit
SDS Plus and Spline Shank
(masonry/Concrete)
1-3/4, * 2, * 2-1/2, * 3" diameters up to 24 " lengths.
sds-plus, sds-max, spline, standard shank lengths 12"and 24"
For drilling deep holes in masonry without a core.
"HAMMER CORE SHANK ADAPTERS "
to connect 5/8-11, 3/4-10, 1-1/4-7 Thread
(for most all masonry drill motors)
(masonry/Concrete)
Has replaceable 3/4-10 threaded coupler for an extra long working life.
You need only replace the threaded adapter if it should wear or break. Due to changes and additions in power tool models,
other adapters may be available, but not listed in this catalog.
"Masonry Screw Installation Kits "
Masonry/Concrete "ROTARY CORE "Drill Bit
5/8" to 6"dia.
12" to 18" lengths.
(masonry/Concrete)
sds-plus, sds max, standard shank.
Rotary masonry Core Drill Bits are a carbide tipped core bit used in standard rotary masonry drill motors.
Rotary Masonry Core Drills provide an extremely smooth cutting action and a clean finished hole.
Because of the negative setting of the carbide cutting teeth, Rotary masonry Core can cut through
the toughest and hardest of aggregate in any type of concrete.
The Rotary Masonry Core Drill sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel.
Rotary Core Drill sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank
IMPORTANT NOTE:
The Rotary Masonry Core Drills can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and
a rated no-load speed of 400 R.P.M.LOADS. to 1,200 R.P.M.LOADS. This includes most combination hammer drills.
When using a combination hammer drill ensure the selector switch is in the rotary only position!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"REBAR CUTTERS"
Standard and SDS Shank
Will cut through the toughest steel or rebar.
1/2" to 3" diameters.
12" AND 18 "lengths.
(masonry/Concrete)
When drilling with a rotary masonry hammer drill and a carbide tipped (percussion) masonry drill bit, the bit must be
quickly stopped when the masonry drill bit tip comes in contact with steel reinforcing bars or wire mesh.
(If the tool is not stopped any carbide-tipped masonry hammer drill bit will fail.)
Using a standard 1/2" chuck capacity rotary masonry drill motor with the rebar cutter inserted into the chuck,
place the rebar cutter into the hole and drill through the embedded rebar or wire by maintaining an even and constant pressure.
After drilling through the rebar or wire, remove the debris from the hole and continue drilling the masonry with the masonry rotary hammer and carbide-tipped drill bit.
Masonry/ Concrete "MILLING CUTTER" drill bit
Designed to cut through
concrete, masonry wire mesh or rebar.
1/2" to 6" diameters.4-1/2"dia.
 
up to 14-3/4 " length. (masonry/Concrete)
When are Carbide-Tipped Masonry Core Drill Bits the best alternative
to Diamond Core Masonry Drill Bits for a particular application?
In general, when evaluating the advantages of using diamond masonry core drill bits
carbide or diamond masonry drill bits, consider the 80/20 rule. 80% of applications
are suitable for a wet diamond masonry core drill and may not be significantly
improved by utilizing carbide masonry core drill bits. 20% of applications, require other alternative solutions and
WET/DRY CARBIDE-TIPPED MASONRY CORE DRILL BITS
and offer significant advantages in such applications. What are these applications?
When encountering applications requiring masonry core drill bits, drilling through
multiple layers of masonry, asphalt, concrete materials stacked together
such as wood, teal, concrete, rebar. A host of others material combinations,
diamond drill bits, the performance can be hindered or completely prohibited.
The Best and Available alternative is the WET/DRY CARBIDE-TIPPED CORE DRILL BITS,
which are designed to solve these difficult jobs encountered by the drilling professionally.
Can Carbide Core Drill Bits and Diamond Core Drill Bits work together?
Yes. Professional core drillers in a variety of situations effectively use both
Diamond masonry concrete Drill Bits and Carbide masonry concrete Core Drill Bits
to complete a project. Whether starting a hole, completing a hole, or anywhere
in between, carbide core drill bits and diamond masonry core
drill bits both make significant contributions.
Example:
Starting a hole into masonry or concrete only to encounter plate steel an inch into the hole.
Switch to carbide masonry concrete core drill bits, drill through the steel,
then switch back to the diamond masonry concrete drill bits
until the next hindrance to the diamond bit is encountered
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"PLATE CUTTER"
Carbide or Diamond
Designed to cut through concrete
and wire mesh and rebar.
 
3/8" to 6"dia.
(masonry/Concrete)
13-1/2 and 24" lengths.
Designed for use in masonry/concrete drilling rigs. The Plate Cutter drill bit is
the ideal choice when a combination of concrete and steel is being drilled.
Steel plate, embedded rebar, or even wire mesh, are not a problem for the masonry concrete Plate Cutter.
This series can be used wet with a small amount of water or even dry. The masonry Plate Cutter can be completely rebuilt
and unlike fragile diamond masonry drill bits, the masonry concrete Plate Cutter will with stand rough usage.
"CARPET STUBBY"
1/8"dia
The Carpet Stubby (Tack Strip Installer Bits) carbide tipped drill bits will drill concrete, wood ,or even terrazzo flooring.
The Carpet Stubby (Tack Strip Installer Bits) is used to drill a hole that allows the installer to place
a nail through the carpet tack strip into the floor underneath.
These Tack Strip Installer Bits or Carpet Stubby Bits combine proper nail size and
correct diameter hole to help preventing carpet tack strip pullout.
"CRUCIFORM"
1-1/2" to 6"dia.
For the aggressive deep holes!
(masonry/Concrete)
Cruciform™ bits can be fine tuned to various applications with utmost ease.
The easy to assemble / disassemble bit system, combined with unmatched durability and flexibility,
make Masonry Concrete drilling Ratio System the professional’s choice. Modular System.
• Up to 6” Diameter
• Allows for Angle Drilling
• Use With or Without Spiral Flute
• Adapters Accommodate Any Combination
• Unmatched Flexibility Interchangeable parts make it the most economical system to date.
Easily used in electric Rotary Hammer Machines when drill rigs, diamond cutting, and water are unavailable.
Drill any hole in masonry or concrete from 1-1/2” to 6” in Diameter.
Choose a Cruciform™ Drill Head from 3, and then drill any depth up to 75” deep.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
TRICONE ROCK MILLING BITS
Carbide Tipped All Sizes. I.A.D.C. Code.
Specifications needed must call for pricing.
 
  
Whirley bits
"DIAMOND Diamond CORE " CARBIDE and DIAMOND SEGMENTED.
wet or dry.
1/2" to 48" diameters.
standard lengths 13-3/4" to 48".
SPECIAL LENGTHS AND SIZES CUSTOM MANUFACTURED.
 
Diamond concrete "CORE DRILL RIGS "
and
GAS POWERED MOTORS.
To fit any application!
(masonry/Concrete)
 
"FORGED HAMMER "
MASONRY / ASPHALT
SDS PLUS*SDS MAX* SPLINE AND ROUND SHANK
        
(masonry/Concrete)
COUNTER BORES
2" diameter.
(masonry/Concrete)
special sizes, custom manufactured.
Railroad tie counter bore are used to anchor concrete railroad crossing pads
to their underlying wooden cross ties using a trox bolt ® head type anchor bolt.
The Trox bolt head must be installed below the surface of the concrete
to prevent damage to vehicle tires. In colder climates where snow removal is necessary.
trox bolt ® countersinking process prevents snowplow blades from shearing off the bolt head.
Railroad tie counter bore, a counter bore, countersinks a two-inch hole into concrete which was a difficult procedure
until the advent of the railroad tie counter bore. Powered by an electric, hydraulic,
or air powered rotary/percussion hammer, railroad tie counter bore allows the operator to countersink
any trox bolt head to the proper depth quickly and easily!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
We also manufacture specialty custom tooling
for special applications and jobs.
All diameters and lengths.
Continuous, Turbo, and segmented
Diamond Saw Blades
 
MORE DIAMOND (MASONRY CONCRETE) SAW BLADES
SDS Plus / SDS Max / Spline
A and B Tapered / ratio / hex
masonry tools.
Standard, Metric and More.
(More Quality Masonry concrete Drill Bits and Tooling)
Metals Glass Woods Fiberglass Porcelain Composites
Concrete Tile Timber Stone Welding Alloys
for All Industry and Individuals.
Many types of tooling available.
A/B Taper shank, sds/MAX shank, sds PLUS shank, tapcon,
spline shank hammer, milling cutters. plate cutters, rebar cutting, cruciform tools.
For over thirty years, "Advantage Drills Incorporated", has been another one of the industry leaders
for design, production, of carbide tipped drill bits and accessory items. We strive to supply the highest quality tooling,
and maintain the best customer service and engineering, possible and that you receive
the Best American Made Products and Service.
Our dedication to research and development has produced many fine products,
such as our line of carbide tipped wood boring drill bits. Research and development
is an everyday part of our operation.
In fact, we can produce one piece carbide tipped drill bits in lengths and diameters that other
manufacturers simply cannot match. Our motto is, "If the law of physics allows it,
We can Manufacturer it for you."
After years of testing custom manufacturing, refining, and listening to many professional
industries like yours, we have help develop carbide tipped drill bits for boring long, large
diameter holes that make all other drill bits in your tool inventories obsolete!
Many milled out of single piece of hss steel, with custom designed
high grade carbide cutting tips. You’ll have no doubt that our masonry and concrete
are designed for the serious industrial craftsman,
productive manufacturer and repair engineers!Contributing to the lower cost-per-hole design of the carbide tipped
drill bits can be re-sharpened, or even completely rebuilt if necessary.
This gives the carbide tipped drill bits the ability to outlast ordinary carbon steel
boring bits an average of 20 times to one, under normal conditions,
dramatically cutting your yearly tooling expense! No more worrying about spot-welded fluting coming loose half way through a hole,
stopping your job dead in its tracks! No more wasted time or money having a longer shank welded onto your present bit in order to do a job!
"Advantage Drills Incorporated" carbide tipped masonry drill bits come in standard sizes
up to four feet in length, with even custom manufacture larger sizes available for your specific needs!
No more time wasted clearing your holes, because the fluting on your present bits isn’t long enough
or proper flute relief for the holes you’re drilling.
Need a longer or larger bits? Give us a call! Our custom designed carbide tipped drill bits drill a true
hole better and faster than your present drill bits!
You will be dealing with one of the most respected manufacturers/ distributors
of carbide-tipped drill bits in the industry. We’ve been in business for over 30 years,
Many of you have been in the concrete Industry for years, and we recognize many
of your needs due to the vast number of you that we have listened to and aided
in helping save thousands of dollars and giving you tooling that works
for your specific needs. But, if you happen to run
across a drilling problem, please give us a call,
you will be talking to an engineer that has been in this specific industry for years!
There’s a good chance we can help, and you’ll find we are sincere in being an asset to you and your needs!
If you don't see it, just call us and ask!
We guarantee the lowest prices and best quality!
E mail or Call Us!
Phone:(407)478-2487
Fax:(407)678-7414 ( 24 hrs )
(9:00 AM TO 5:00 PM EST)
masonry drill bits, sds plus, sds max, hammer drills, long bits, tungsten carbide, metric sds,
rotary hammer, American Made spline rotary hammers, milwaukee, anchors, heavy duty concrete tools,
diamond core bits, concrete chisel, carbide-tipped, carbide tip, SDS, sds plus, sds, sds/MAX.
concrete, tapcon, spline drive, milling cutters, diamond core, A Taper, B Taper, sds/MAX hammer,
sds/plus, spline milling cutters. Masonry drill bits, masonry drill bits, sds plus masonry drills,
sds max hammer drills, percussion hammer, long drills, tungsten carbide masonry drills, metric sds tools,
rotary hammer bits, American Made tooling, spline rotary hammer drill, milwaukee tools,
Tapcon anchor drills, heavy duty concrete tools, diamond core bits, concrete chisels,
carbide-tipped tools, carbide tip bits, SDS tools, sds plus drill bits, sds, sds/MAX.
concrete, spline hammer, milling cutters, diamond core, A Taper, B Taper,
sds/MAX hammer, sds/plus masonry, spline milling cutters.
Home
other links masonry Drills.
wikipedia.
Definitions
|
Sutton Tool
