"HAMMER CORE"
masonry/concrete
1"to 6" Diameters
12 And 18 Inch Lengths.
sds-plus, sds-max, spline, standard shank.
Rotary Core Masonry Drill Bits are a carbide tipped masonry core bit used in standard rotary drill motors. Rotary Core Masonry Drill Bits provide an extremely smooth cutting action and a clean finished hole. Because of the negative setting of the carbide cutting teeth, Rotary Core Masonry Drill Bits can cut through the toughest and hardest of aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel. Rotary Core Masonry Drill Bits sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank.
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R.P.M. to 1,200 R.P.M.. This includes most combination hammer drills. When using a combination hammer drill ensure the selector switch is in the rotary only position!



"Hard Head"
masonry/concrete
1-3/4, 2, 2-1/2, 3 diameters up to 24 " lengths.
sds-plus, sds-max, spline, standard shank.



"HAMMER CORE SHANK ADAPTERS "
to connect 5/8-11, 3/4-10, 1-1/4-7 Thread
(for most all masonry motors)
have a replaceable 3/4-10 threaded coupler for an extra long working life. You need only replace the threaded adapter if it should wear or break. Due to changes and additions in power tool models, other adapters may be available, but not listed in this catalog.




 "Screw Installation Kits "
Concrete masonry





"ROTARY CORE "
masonry hammer
5/8" to 6"dia.
12" to 18" lengths.
sds-plus, sds max, standard shank.
Rotary Core Masonry Drill Bits are a carbide tipped masonry core bit used in standard rotary drill motors. Rotary Core Masonry Drill Bits provide an extremely smooth cutting action and a clean finished hole. Because of the negative setting of the carbide cutting teeth, Rotary Core Masonry Drill Bits can cut through the toughest and hardest of aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel. Rotary Core Masonry Drill Bits sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R.P.M. to 1,200 R.P.M.. This includes most combination hammer drills. When using a combination hammer drill ensure the selector switch is in the rotary only position!



"REBAR CUTTER"
masonry/concrete
Will cut through the toughest steel or rebar.
1/2" to 3 " diameters.
12" AND 18 " lengths.

When drilling with a rotary hammer and a carbide tipped masonry drill bit
(percussion), the masonry drill bit must be quickly stopped when the masonry drill bit tip comes in contact with steel reinforcing bars or wire mesh. (If the tool is not stopped any carbide-tipped masonry hammer drill bit will fail.) Using a standard 1/2" chuck capacity rotary drill with the rebar cutter inserted into the chuck, place the rebar cutter into the hole and drill through the embedded rebar or wire by maintaining an even and constant pressure. After drilling through the rebar or wire, remove the debris from the hole and continue drilling with the rotary hammer and carbide-tipped masonry drill bit.



"CONCRETE MILLING CUTTER"
Designed to cut through
concrete and wire mesh or rebar.
1/2" to 6" diameters.4-1/2"dia.
up to 14-3/4 " length.
When are Carbide-Tipped Core Drill Bits the best alternative to Diamond Core Drill Bits for a particular application?
In general when evaluating the advantages of using core drill bits carbide or diamond drill bits, consider the 80/20 rule. 80% of applications are suitable for wet diamond core drill and may not be significantly improved by utilizing carbide core drill bits. 20% of applications, require other alternative solutions and WET/DRY CARBIDE-TIPPED CORE DRILL BITS offer significant advantages in such applications. What are these applications? When encountering applications requiring core drill bits to drill through multiple layers of materials stacked together, such as wood, steel, concrete, rebar and a host of others material combinations, diamond drill bits performance can be hindered or completely prohibited. The Best & Available alternative is the WET/DRY CARBIDE-TIPPED CORE DRILL BITS, which are designed to solve these difficult jobs encountered by the drilling professional. Can Carbide Core Drill Bits and Diamond Core Drill Bits work together? Yes, professional core drillers in a variety of situations effectively use both Diamond Drill Bits and Carbide Core Drill Bits to complete a project. Whether starting a hole, completing a hole, or anywhere in between, carbide core drill bits and diamond core drill bits both make significant contributions. Example: starting a hole into concrete only to encounter plate steel an inch into the hole. Switch to carbide core drill bits, drill through the steel, then switch back to the diamond drill bits until the next hindrance to the diamond bit is encountered



"PLATE CUTTER"
masonry/concrete
Carbide or Diamond
Designed to cut through concrete
and wire mesh and rebar.
3/8" to 6"dia.
13-1/2 & 24" lengths.
Designed for use in a drill rig, the Plate Cutter is the ideal choice when a combination of concrete and steel is being drilled. Steel plate, embedded rebar, or even wire mesh, are not a problem for the Plate Cutter. This series can be used wet with a small amount of water or even dry. The Plate Cutter can be completely rebuilt and unlike fragile diamond drills, the Plate Cutter will with stand rough usage.



"CRUCIFORM"
1-1/2" to 6"dia.
For the aggressive deep holes!



"RATIO"
masonry/concrete
1/2 to 1-1/2 standard.
Metric 12mm to 35mm. diameters. up to 750mm lengths.
threads are 1/2-13 pitch




"DIAMOND CORE " CARBIDE & DIAMOND SEGMENTED.
Masonry/Concrete/Rock
wet and dry.
1/2" to 48" diameters.
standard lengths 13-3/4".
SPECIAL LENGTHS AND SIZES CAN BE MANUFACTURED.





"CORE RIGS "
&
GAS POWERED MOTORS.
for masonry/concrete
To fit any application!





"FORGED HAMMER "
MASONRY / ASPHALT
SDS PLUS*SDS MAX* SPLINE AND ROUND SHANK



COUNTER BORES masonry/asphalt/concrete
2" diameter.
special sizes, custom manufactured.
Railroad tie counter bore are used to anchor concrete railroad crossing pads to their underlying wooden cross ties using a trox bolt ® head type anchor bolt. The Trox bolt head must be installed below the surface of the concrete to prevent damage to vehicle tires. In colder climates where snow removal is necessary, this trox bolt ® countersinking process prevents snowplow blades from shearing off the bolt head. Railroad tie counter bore, a masonry counter bore, countersinks a two-inch hole into concrete which was a difficult procedure until the advent of the railroad tie counter bore masonry counter bore. Powered by an electric, hydraulic, or air powered rotary/percussion hammer, railroad tie counter bore allows the operator to countersink any trox bolt head to the proper depth quickly and easily!




We also manufacture specialty masonry tooling
for special jobs.
All diameters and lengths.



Continuous, Turbo, and segmented
Masonry/Concrete/ Diamond Blades


MORE DIAMOND BLADES



SDS Plus / SDS Max / Spline
A and B Tapered / ratio / hex
masonry tools.
Standard, Metric and More.
(More Quality Bits and Tooling)
Metals Glass Woods Fiberglass Porcelain Composites
Concrete Tile Timber Stone Welding Alloys
for All Industry and Individuals.

Many types of tooling available.
A/B Taper shank, masonry, concrete, sds/MAX shank, sds PLUS shank, tapcon,
spline shank hammer, milling cutters. plate cutters, rebar cutting, cruciform tools.

For over thirty years Advantage Drills Inc", has been an industry innovator and leader in design, production, and distribution of masonry, concrete, stone, asphalt, and demolition tooling. Our basic business principles are to use the highest and best quality materials, the most updated manufacturing technologies and equipment. Acquire the best engineers, and strive to give you the best possible service, both in information and technical support. We assure you of the best products and best Service available!
"Advantage Drills Inc."

We guarantee the lowest prices and best quality!
E mail or Call Us!
Phone:(407)478-2487 BITS
Fax:(407)678-7414  ( 24 hrs )
(9:00 AM TO 5:00 PM EST)


Home

other links masonry.
wikipedia.
Definitions
Masonry, concrete, sds/PLUS shank, sds/MAX shank, spline shank hammer, A/B Taper shank, sds/MAX hammer, sds, MASONRY, sds bits, sds max, sds/max, sds/plus, long masonry, tapcon, tapcons, spline milling cutters, plate cutters, rebar cutting, cruciform tools, masonry bits concrete, tapcon masonry bit, sds bits, spline drive, sds plus, sds max bits, sds max, SDS, sds carbide, sds plus bits, sds max tapcon, anchor bits, sds/ plus bits, spline concrete milling, stucco, SDS-plus bit, spline, sds, plus, sds bits