Masonry /Concrete /counter bores / demolition tooling
SDS-Plus /SDS-Max / Hammer / Masonry core
spline Hammer / A and B tapered
Standard / Metric Shank/Rock Bits
Percussion Hammer masonry
SDS PLUS Hammer masonry
Ratio Hammer masonry
masonry Demolition Chisels
Specialized, manufactured tooling for unusual applications.
Longer lengths as well as larger diameters.
Over 30 Years of Quality Tool Manufacturing!
No One Knows Masonry
More than we do!
------No One!------
Diamond blades /concrete /masonry /tooling.
Standard, metric, and fractional.
WE'LL HAVE THE TOOLING YOU WILL NEED.
ENGINEERS ARE ALWAYS READY TO ASSIST WITH ALL QUESTIONS.
If it's one or more, Call or E-mail us for price and delivery.
Or, go to our live chat for information.
PROPER APPLICATIONS, TOOLING PROBLEMS, DESIGN, PROPER PROCEDURES
AND PURCHASING THE RIGHT TOOLING.
We will Custom manufacture tooling for your special needs.
We guarantee the lowest prices and best quality!
prices as low as $.99 for 1/4 x6 masonry drills.
E mail or Call Us for pricing!
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
American Made!
Tools manufactured for masonry/concrete are designed
for rugged heavy duty us in all conditions. The specialized
alloyed4140 through hardened steels and c-2/c-3 carbide
are designed for continuous use in all the hardest masonry
or concrete. Manufactured in fractional metric sizes.
Larger diameter and length tooling custom
manufactured to your needs.
" Fast Spiral "
masonry/concrete
1/8" to 1"dia.
up to 18" lengths.
These masonry drill bits have a proven Fast Spiral Drill Bit design, combined with a special carbide tip and a tough steel alloy body, allows the Fast Spiral Bit to drill quickly and cleanly using a standard rotary drill motor. These Fast Spiral masonry drill bits has a flute design that allows for less heat buildup, providing the longest bit life possible.
"Hammer Percussion"
masonry/concrete
1/8" to 1-1/2" diameters: metric sizes also.
(From 2-3/4" to 84"+) lengths
Straight Shank Hammer Bits are designed for use in hard hitting hammer drills that utilize a 3-jawed, Jacob’s type chuck. These Straight Shank Hammer Bits Carbide Tipped Masonry Drill Bits, feature an extra tough carbide tipped drill bits that gives outstanding performance in the roughest drilling applications. The heat-treated and surface hardened alloy body, coupled with an extra tough percussion carbide tip, is designed to stay sharper longer. The Straight Shank Hammer Drill Bits design allows for easy factory sharpening to help extend the life of the bit.
"SDS/PLUS"
masonry/concrete
3/16" to 1-1/8"diameters or(4 mm to 28 mm).
up to 38"+ lengths.
The SDS Plus Carbide Tipped Drill Bit feature the SDS plus versatile Slot Drive System that fits all rotary hammers that specify an SDS Plus Shank. Positive drive slots deliver maximum drilling torque and maximum hammering energy for faster drilling. We combined the “Ultra Flute”, an asymmetrical spiral design with the popular SDS Plus Shank to achieve a combination that makes our the fastest drilling carbide-tipped hammer bit of its type!
"SDS/MAX "
masonry/concrete
Designed with Five carbide tips.
3/8" to 1-1/2"diameters and metric.
up to 72-1/2 " + lengths.
SDS Max Drill Bits are Carbide Tipped Masonry Drill Bits that have a heavy duty slot drive system that is designed to maximizes the performance. SDS Max Drill Bits will fit any rotary hammer that is designed with an SDS Max ® drive system. has three positive drive slots and two ball retainer slots incorporated into the SDS Max ® shank design. The design in the SDS Max Carbide Tipped Masonry Drill Bits allow the operator to drill large diameter holes with ease. The SDS Max Drill Bits are ® 5/8” diameter or larger are equipped with a multi-cutter tip design.
"SPLINE DRIVE"
Hammer
masonry/concrete
3/8" to 1-1/2"diameter standard and metric sizes also,
up to 108"+ lengths.
The Spline Hammer Bits feature a carbide tipped and spline drive. Spline Drive drill bits are held to exacting tolerances to assure perfect fit as well as maximum impact and torque transmission. Spline Drill Bits - are rotary/percussion/hammer carbide tipped drill bits are industrial drills that are milled from a single piece of steel and are designed with maximum strength to provide maximum life.
"EXTRA LONG MASONRY"
1/4" to 1-1/2"dia.
UP TO 108" lengths
Carbide Tipped long Bell Hanger Drill Bits or Installer Bits are used in small wire installation or fishing wire threw holes that have just been drilled. These installer bits are carbide tipped. The Bell Hanger Drill Bits are specifically designed for small wire installation applications such as telephone wire installation, security alarm installation, fire alarm installation, cable wire installation, data network wire installation, electricians and other professionals. All use these unique carbide tipped installer bits to drill holes through walls, studs and other obstacles and then use the unique threw hole, attaches a wire to the installer bit and fishes the small wire back through the drilled hole with ease.
"Combination Drills / Counter Sink"
Masonry Hurricane Shutter Installation anchors
1/4 pilot with 1/2 counter bore 3-1/2" and 5" lengths.
Whether protecting your home, property, business or loved one, take the Guesswork Out of Hurricane Shutter Anchors, Storm Shutter Anchors, and Security Shutter Anchor Installation...Hurricane Anchor Bits are Combination masonry drill bits designed for masonry anchors. These bits are designed for Hurricane Shutter Anchors or Hurricane Anchors and are equipped with a carbide-tipped pilot drill bit, a carbide tipped counter bore, depth gage collar. Reliable Hurricane Shutter Installation is easy when Hurricane Anchors are set to same depth. To install hurricane anchors just adjust to counter sinking depth settings. Once the Hurricane Shutter Anchors depth is adjusted, duplicate holes with exactly the same depth can be quickly drilled, one after another! In just one easy step Hurricane Shutter Anchors Bits or Hurricane Anchor Bits will repeatedly drill holes for hurricane anchors lead shields, as well as a small hole to allow clearance for the screw or bolt to pass through.
 
Carbide Tipped "Earth Auger "
2" dia to 30 " lengths, 1/2 SHANK
Termite bait station installation and soil sampling has never been easier. The Carbide Tipped Earth Auger is ideal for termite bait station installation or soil sampling. Armed with a carbide tipped pilot and a carbide tipped auger flute cutter you will drill dozens if not hundreds of holes with this carbide tipped earth auger. The Carbide Tipped Earth Auger is equipped with a standard 7/16” Hex shank that fits both quick change chucks and 1/2” Jacobs® Style Chucks.
"TAPCON "
masonry/concrete
5/32",1/4"dia.
anchor/screw installations.
SDS Plus Tapcon Carbide Tipped Drill Bits are rotary hammer carbide tipped drill bits, they are specifically designed for use with Tapcon® concrete screw anchors. Each SDS Plus Tapcon Carbide Tipped Drill Bit are precisely sized to match the required tolerances necessary to achieve maximum holding power from self threading concrete screws. These SDS Plus Tapcon carbide tipped drill bits have a 5/16” hex, immediately below the shank, that fits directly into the concrete screw anchor installation tool. SDS Plus Tapcon - SDS Plus Carbide Tipped Drill Bits are designed for use with Tapcon® type anchoring systems that utilize a masonry anchor screw with a self tapping thread. Constructed of hardened alloy steel, a close tolerance carbide tip and a SDS-Plus/ Hex style shank, the SDS Plus Tapcon Drill Bits will provide long life and superior performance. The SDS Plus Tapcon Drill Bits are available by the piece (Standard Pack) or quantities of 10 per package (Pro-Pack).
"CARPET STUBBY"
1/8"dia
The Carpet Stubby (Tack Strip Installer Bits) carbide tipped drill bits will drill concrete, wood ,or even terrazzo flooring. The Carpet Stubby (Tack Strip Installer Bits) is used to drill a hole that allows the installer to place a nail through the carpet tack strip into the floor underneath. These Tack Strip Installer Bits or Carpet Stubby Bits combine proper nail size and correct diameter hole to help preventing carpet tack strip pullout.
"A or B TAPER"
Masonry/concrete
Hammer
(A) Taper 3/16"to 7/8"dia.
(B) Taper 7/16" to 1-1/8"dia.
Taper and B Taper style masonry drill bits are made especially to fit our high quality A Taper and B Taper adapters. The smaller A Taper shanks are intended for bit diameters from 3/16" to 7/8". B Taper shanks are most effective in large capacity rotary / percussion hammers and are available in sizes from 7/16" to 1-1/8" diameters. Taper hammer masonry drill bits are produced from high grade steel that is heat treated and tempered to provide the longest drilling life possible. These masonry drill bits A Taper and B Taper masonry drill bits have a asymmetrical spiral flute design, allows for efficient dust removal and cooler operating temperatures.
"A or B TAPER ADAPTERS"
For SDS & Spline.
Advantage Drills provides a complete line of percussion drill bit accessories of taper chuck adapters for A & B Taper carbide tipped drill bits plus a complete line of Taper carbide tipped drill bits that fit most types of current production or even discontinued rotary/percussion hammer models. When A or B Taper Adapters are combined with A or B Taper carbide tipped drill bits, costs are held to a minimum. The common problem of having too many carbide tipped drill bits of one size and too few of another is eliminated. A and B Taper Adapters are produced from high quality alloy steel and are heat treated for extra long life. A drift pin is provided with each adapter at no charge. The drift pin is used to remove A or B Taper carbide tipped drill bits from the adapters. Due to changing models and additions to power tool lines, other A and B Adapters may be available but are not shown.
"HAMMER CORE"
masonry/concrete
1"to 6" Diameters
12 And 18 Inch Lengths.
sds-plus, sds-max, spline, standard shank.
Rotary Core Masonry Drill Bits are a carbide tipped masonry core bit used in standard rotary drill motors. Rotary Core Masonry Drill Bits provide an extremely smooth cutting action and a clean finished hole. Because of the negative setting of the carbide cutting teeth, Rotary Core Masonry Drill Bits can cut through the toughest and hardest of aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel. Rotary Core Masonry Drill Bits sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank.
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R.P.M. to 1,200 R.P.M.. This includes most combination hammer drills. When using a combination hammer drill ensure the selector switch is in the rotary only position!
"Hard Head"
masonry/concrete
1-3/4, 2, 2-1/2, 3 diameters up to 24 " lengths.
sds-plus, sds-max, spline, standard shank.
"HAMMER CORE SHANK ADAPTERS "
to connect 5/8-11, 3/4-10, 1-1/4-7 Thread
(for most all masonry motors)
have a replaceable 3/4-10 threaded coupler for an extra long working life. You need only replace the threaded adapter if it should wear or break. Due to changes and additions in power tool models, other adapters may be available, but not listed in this catalog.
"Screw Installation Kits "
Concrete masonry
"ROTARY CORE "
masonry hammer
5/8" to 6"dia.
12" to 18" lengths.
sds-plus, sds max, standard shank.
Rotary Core Masonry Drill Bits are a carbide tipped masonry core bit used in standard rotary drill motors. Rotary Core Masonry Drill Bits provide an extremely smooth cutting action and a clean finished hole. Because of the negative setting of the carbide cutting teeth, Rotary Core Masonry Drill Bits can cut through the toughest and hardest of aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel. Rotary Core Masonry Drill Bits sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R.P.M. to 1,200 R.P.M.. This includes most combination hammer drills. When using a combination hammer drill ensure the selector switch is in the rotary only position!
"REBAR CUTTER"
masonry/concrete
Will cut through the toughest steel or rebar.
1/2" to 3 " diameters.
12" AND 18 " lengths.
When drilling with a rotary hammer and a carbide tipped masonry drill bit
(percussion), the masonry drill bit must be quickly stopped when the masonry drill bit tip comes in contact with steel reinforcing bars or wire mesh. (If the tool is not stopped any carbide-tipped masonry hammer drill bit will fail.) Using a standard 1/2" chuck capacity rotary drill with the rebar cutter inserted into the chuck, place the rebar cutter into the hole and drill through the embedded rebar or wire by maintaining an even and constant pressure. After drilling through the rebar or wire, remove the debris from the hole and continue drilling with the rotary hammer and carbide-tipped masonry drill bit.
"CONCRETE MILLING CUTTER"
Designed to cut through
concrete and wire mesh or rebar.
1/2" to 6" diameters.4-1/2"dia.
up to 14-3/4 " length.
When are Carbide-Tipped Core Drill Bits the best alternative to Diamond Core Drill Bits for a particular application?
In general when evaluating the advantages of using core drill bits carbide or diamond drill bits, consider the 80/20 rule. 80% of applications are suitable for wet diamond core drill and may not be significantly improved by utilizing carbide core drill bits. 20% of applications, require other alternative solutions and WET/DRY CARBIDE-TIPPED CORE DRILL BITS offer significant advantages in such applications. What are these applications? When encountering applications requiring core drill bits to drill through multiple layers of materials stacked together, such as wood, steel, concrete, rebar and a host of others material combinations, diamond drill bits performance can be hindered or completely prohibited. The Best & Available alternative is the WET/DRY CARBIDE-TIPPED CORE DRILL BITS, which are designed to solve these difficult jobs encountered by the drilling professional. Can Carbide Core Drill Bits and Diamond Core Drill Bits work together? Yes, professional core drillers in a variety of situations effectively use both Diamond Drill Bits and Carbide Core Drill Bits to complete a project. Whether starting a hole, completing a hole, or anywhere in between, carbide core drill bits and diamond core drill bits both make significant contributions. Example: starting a hole into concrete only to encounter plate steel an inch into the hole. Switch to carbide core drill bits, drill through the steel, then switch back to the diamond drill bits until the next hindrance to the diamond bit is encountered
"PLATE CUTTER"
masonry/concrete
Carbide or Diamond
Designed to cut through concrete
and wire mesh and rebar.
3/8" to 6"dia.
13-1/2 & 24" lengths.
Designed for use in a drill rig, the Plate Cutter is the ideal choice when a combination of concrete and steel is being drilled. Steel plate, embedded rebar, or even wire mesh, are not a problem for the Plate Cutter. This series can be used wet with a small amount of water or even dry. The Plate Cutter can be completely rebuilt and unlike fragile diamond drills, the Plate Cutter will with stand rough usage.
"CRUCIFORM"
1-1/2" to 6"dia.
For the aggressive deep holes!
"RATIO"
masonry/concrete
1/2 to 1-1/2 standard.
Metric 12mm to 35mm. diameters. up to 750mm lengths.
threads are 1/2-13 pitch
"DIAMOND CORE " CARBIDE & DIAMOND SEGMENTED.
Masonry/Concrete/Rock
wet and dry.
1/2" to 48" diameters.
standard lengths 13-3/4".
SPECIAL LENGTHS AND SIZES CAN BE MANUFACTURED.
 
 
"CORE RIGS "
&
GAS POWERED MOTORS.
for masonry/concrete
To fit any application!
 
"FORGED HAMMER "
MASONRY / ASPHALT
SDS PLUS*SDS MAX* SPLINE AND ROUND SHANK
        
COUNTER BORES masonry/asphalt/concrete
2" diameter.
special sizes, custom manufactured.
Railroad tie counter bore are used to anchor concrete railroad crossing pads to their underlying wooden cross ties using a trox bolt ® head type anchor bolt. The Trox bolt head must be installed below the surface of the concrete to prevent damage to vehicle tires. In colder climates where snow removal is necessary, this trox bolt ® countersinking process prevents snowplow blades from shearing off the bolt head. Railroad tie counter bore, a masonry counter bore, countersinks a two-inch hole into concrete which was a difficult procedure until the advent of the railroad tie counter bore masonry counter bore. Powered by an electric, hydraulic, or air powered rotary/percussion hammer, railroad tie counter bore allows the operator to countersink any trox bolt head to the proper depth quickly and easily!
We also manufacture specialty masonry tooling
for special jobs.
All diameters and lengths.
Continuous, Turbo, and segmented
Masonry/Concrete/ Diamond Blades
 
MORE DIAMOND BLADES
SDS Plus / SDS Max / Spline
A and B Tapered / ratio / hex
masonry tools.
Standard, Metric and More.
(More Quality Bits and Tooling)
Metals Glass Woods Fiberglass Porcelain Composites
Concrete Tile Timber Stone Welding Alloys
for All Industry and Individuals.
Many types of tooling available.
A/B Taper shank, masonry, concrete, sds/MAX shank, sds PLUS shank, tapcon,
spline shank hammer, milling cutters. plate cutters, rebar cutting, cruciform tools.
For over thirty years Advantage Drills Inc", has been an industry innovator and leader in design, production, and distribution of masonry, concrete, stone, asphalt, and demolition tooling. Our basic business principles are to use the highest and best quality materials, the most updated manufacturing technologies and equipment. Acquire the best engineers, and strive to give you the best possible service, both in information and technical support. We assure you of the best products and best Service available!
"Advantage Drills Inc."
We guarantee the lowest prices and best quality!
E mail or Call Us!
Phone:(407)478-2487 BITS
Fax:(407)678-7414 ( 24 hrs )
(9:00 AM TO 5:00 PM EST)
Home
other links masonry.
wikipedia.
Definitions
Masonry, concrete, sds/PLUS shank, sds/MAX shank, spline shank hammer, A/B Taper shank, sds/MAX hammer, sds, MASONRY, sds bits, sds max, sds/max, sds/plus, long masonry, tapcon, tapcons, spline milling cutters, plate cutters, rebar cutting, cruciform tools, masonry bits concrete, tapcon masonry bit, sds bits, spline drive, sds plus, sds max bits, sds max, SDS, sds carbide, sds plus bits, sds max tapcon, anchor bits, sds/ plus bits, spline concrete milling, stucco, SDS-plus bit, spline, sds, plus, sds bits
|
If
It's Manufactured, We'll Have it, Or Manufacture It
For You! 