"If it's Manufactured, We'll Have it, or Manufacture it for you! " AMERICAN MANUFACTURED, MADE IN USA !
Custom and Standard Tooling, for all Applications Large or Small. Specialists for Specific Needs Drill Bits or all other Tooling.
links (click) for types of tooling
your looking for below
HSS Twist Drills
all metal working Tooling
Micro, Metric, Fractional,
tapered, extra long,
All Metal Working Tooling
and custom needs
Drills and Tooling.
micro, Letter, Number,
Fractional, Metric, specials
Cores- Drills -router-jig-finishing Tooling
Custom design mfg specials. Metal bonded,
plated braze bonded
Stone Cutting Tooling
micro, core, router, pads,
disks, cnc, pcd,
metal bond routers
finger bits, drums.
Hydraulic Drill Motors
SDS and Wood Boring Motors
Portable Magnetic Drill Motors
Electric, Hydraulic, Pneumatic
sds, spline, A & B taper,
Drills SDS,-SDS MAX
A & B Taper, Spline, Standard, Ratio.
wet & dry
Hurricane Anchor Drills
Wood Augers Treated Timbers
log home const
epee, Brazilian Wood
special mfg needs
Alloyed. Cast Iron,
Brass, High Strength
Fractional-Decimal Convergence Chart
HSS & Cobalt
Drill Feed and Speed Chart
American workers With American Skills For Today's World! Lets try to Build a Better Economy and World for tomorrow-Together!
Cobalt, carbide, High speed steel Drill Bits, M-7drill sets, M-1 jobber bits manufactured USA.Call or E Mail for pricing.
Hole cutters, air craft routers, shell mills, reamers,
tin coated tooling, Reamers, Core drills, dove tail cutters, annular cutters,
M-2 parabolic drills, end mills, hole saws,M-35 mechanics length,
M-42 cobalt drill bits. Jobber length drills, metric drill sets,
numbered, letter, decimal drill bits, fractional drill sets.
Specialty custom manufactured tooling. Stepped Bits- Manufacturer-Distributor
WE guarantee the lowest prices.
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
Drill Bits for all metals, Mild steel, Stainless Steel, Inconel,
Hastelloy, Monel as well as non ferrous such as Aluminum, Brass, Copper and many more.M-7 Metric, Fractional, Decimal, Letter, Numbered, Micro.
Extra long and short length drills as well as all diameters not found anywhere else.
Over 30 years of manufacturing and distributing
quality drills bits and all cutting tools World Wide.
Bulk and Blanket Pricing available!
Tooling American Made.
Modified or custom manufactured cobalt, carbide, M-7, for your specific needs.
If your tired of shopping carts or constantly getting the wrong tool or run around then call or write:
ADVANTAGE DRILLS INC.
DRILL BITS AND CUTTING TOOL NEED AT GUARANTEED LOWEST PRICES.
ENGINEERS ON STAFF TO ASSIST YOU WITH ALL YOUR TOOLING NEEDS.
Call, Fax, or E: mail us for the tooling your looking for!
No application too small.
Call or. E Mail for pricing
special pricing on Cobalt and HSS Jobbers
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
HOW OUR M-7 TWIST DRILLS ARE MANUFACTURED
Over 80 million metal working drill bits and cutting tools offered!
Special sale price hss cobalt,
Diamond (saw blades, Cores)
Diamond (glass, tile, composite)
sizes start at .002 decimal
E mail or call us.
We cannot display pricing due to Pricing is below wholesale
|135 degree split point|
jobber, tapered, screw machine.
metric, fractional, decimal, number.
from #1-80, 1/16 -4" Letter -A-Z.
Metric 1MM to 13MM.
The best for Stainless Steels!
135 And 118 degree
All diameters 6" length.
High Speed Steel, Cobalt,
Carbide, Carbide Tip twist drills.
33/64ths and up
as well as Metric.
|"Tap-Drill Combo "|
standard and Metric
4-40 to12-28 Mach Screw
1/4" to 3/4-10 Fractional
1/16-27 to 1-11-1/2 pipe
Cobalt and High Speed Steel.
Best for Drilling aluminum, brass, copper,
Alloyed Steel, for deep hole drilling
Carbide Tip Hard Steel
(For hardened steels. All sizes.)
Designed with special Angle tip and rake angle
For Very Hard Steels and broken tools.
|NC and CNC Spotting drills|
Screw Machine Length
Fraction, Metric, Decimal, Letter,
number, letter, decimal
from .0020 decimals (.050mm)
up to 4" Dia..
1/64ths prices start at .24¢ Ea.
These drill bits are bright, m-1 through hardened
|Titanium (TIN) coated |
All diameters and lengths
Increased lubricity for difficult drilling.
We also offer all other coatings.
M-35, M-42, M-56
Every size and length.
Metric, Fractional, Micro
Numbered, Letter, Decimal
|Extra Long |
3/64" to 1-1/4"
letter, number and fractional
|Stub length |
2" to 3-1/4" Dia. strait shank and Morse Taper
Both 1/4-28 and 7/16-14 Threaded
All sizes number, fractional, letter,
hss and cobalt,
carbide tipped, brad point and standard .
|Morse Taper |
Notched point, carbide, cobalt, hss, tin coat
Oil hole Through lubricant drills
Standard shank and Morse taper
Fractional, metric, decimal and custom mfg.
Screw and Pipe Extractors
|Stepped Twist |
Tapered Twist Bits To do in One step.
Flat or Tapered Step.
fractional and number sizes
S, F and double ended
3 and 4 Flute Core Drills
Solid Carbide and High Speed Steels
|Vent twist |
1/2" to 2" dia..
Sheeter twist drills
|Specially designed twist drills for|
Plexiglas, Plastic, Fiberglass
and Gel coat
Aircraft router bits
Combo Drill/Counter sink
hss, carbide and cobalt
All above Reamers range in sizes
from Micro to larger Decimal and Fractional.
We also custom milling for on size or special applications.
|Taper, Kar, Bridge, aligning, Strait, Spiral |
Fractional, decimal, metric, custom
Adjustable Hand and Expansion Reamers
Hog Nose Reamers
1/4" and up
CORE DRILLS for hole enlarging.
3 and 4 FLUTE CORE DRILLS
mfg. hss, cobalt, carbide
Strait Shank And Morse Taper
single, three, and four flute
counter sinks and center reamers
Drill Sets- index's,
Tap and Drill combo index's
metric, micro, letter, numbered,
decimal, and fractional.
Special indexes designed for your needs.
Large drill index's Hss, Cobalt, Carbide
as well as large drill indexes for all needs.
Hydraulic, Pneumatic, and Electric Drill motors
Magnetic Portable Drill Machines
All tooling available in all sizes and custom milled for your needs.
for aggressive cutting
1, 2, 3,4 lengths
1/2" to 5", diameters
hss, cobalt, carbide.
Concave cutter heads
Shell end mills
hss and carbide all sizes.
All TAPS and DIES
From Micro Sizes.002 to 5 "standard.
|Side mill cutters|
Slitting saw mills
Plain milling cutters
side chip clearance saws
|TOOLS FOR COMPOSITES SOLID CARBIDE|
drive matic Drill Countersink
Space matic drill and countersink
Two Flute Router
Three Flute Router
Fluted , Diamond Cut Routers,
nut plate Drill and Countersinks, Dagger Drills
carbide and diamond
|Solid Carbide and M-42, Cobalt|
All styles and configurations
Extra long, roughing, double ended.
ball nose, end cut, 2,3,4,6, flute
and specialty custom manufacture
Indexable Carbide Fly Cutters
|Inserted Carbide Counter sinks|
|Corner Rounding End Mills all Radius's|
Index able Carbide End Mills
Cap Screw Counter bores
Carbide Hole Saws
Bi Metal Hole Saws
For all steel and woods
cut up to 10" diameter 1-3/4" depth
For over thirty years Advantage Drills Inc", has been an industry innovator
and leader in design, production, and distribution of tooling.
Our basic business principles are to use the highest and best quality materials,
the most updated manufacturing technologies and equipment.
Acquire the best engineers, and strive to give you the best possible service,
both in information and technical support.
We assure you of the best Products, Service, and Price available!
Advantage Drills Inc.
Other Quality Drill Bits for
Metals Glass Masonry Concrete Woods Fiberglass Porcelain Composites Tile Timber Stone
Quality Tooling for All Industry and Individuals.
CALL: 407-478-2487 OR FAX: 407-678-7414
cobalt Drill bits, micro carbide, stainless steel, professional grade diamond, carbide and specialty tooling, drilling stainless steel, hss twist, metric m7, carbide, extra long sets, diamond, drilling bits, bosch, CNC Cutters, Custom Cutting Tools, CNC, Mill, Lathe, Endmills, mini, carbide cutters, titanium coated, makita, drill sharpener, counter sink, black and gold, metric, sharpening drill bits, hole saws, dremel , hand tools, step drills, drill tools, carbide drill, hole saw, bosch drill bits, cordless tools, long drill bits, hole cutter, drill bit sets, tapered drill bits, carbide drill bits, titanium drill bits, taper drill, step drill bits, drill bit set, how to sharpen, drill sets, step drill bit, cutting tools, drill press tools, CNC drills, precision drill bits, milwaukee, rough end mills, morse taper, MT taper, insert drill bits, coolant hole, hard steel drill, left hand drillbits, small diameter, end mills, CNC drill tools,