"If it's Manufactured, We'll Have it, or Manufacture it for you! " AMERICAN MANUFACTURED, MADE IN USA !
Custom and Standard Tooling, for all Applications Large or Small. Specialists for Specific Needs Drill Bits or all other Tooling.

HSS Twist Drills
(m-1,m-2,m-7)
all metal working Tooling
Micro, Metric, Fractional,
number, letter
tapered, extra long,
over sized,
All Metal Working Tooling
and custom needs

Cobalt/Carbide
Drills and Tooling.
micro, Letter, Number,
Fractional, Metric, specials

Reamers
Core Drills,
Counter Sinks
custom needs

Annular Cutters

Diamond
Drill Bits
Glass Porcelain
Ceramic
Cores- Drills -router-jig-finishing Tooling

Glass Porcelain
Ceramic, Tile
Custom design mfg specials. Metal bonded,
plated braze bonded

Diamond Drill
Carbon Composite
Stone Cutting Tooling
micro, core, router, pads,
disks, cnc, pcd,
plated, brazed,
metal bond routers
finger bits, drums.

Pneumatic
Hydraulic Drill Motors
SDS and Wood Boring Motors

Electric
Drills

Drill Motors
And Accessories

Portable Magnetic Drill Motors
Electric, Hydraulic, Pneumatic

Masonry
sds, spline, A & B taper,
extra long
custom designed

Concrete

Drills SDS,-SDS MAX
A & B Taper, Spline, Standard, Ratio.
custom designed

Diamond Cores
wet & dry
saw blades
core rigs

Hurricane Anchor Drills

Fusebar Reamers

Fiberglass, Plastics

Wood Working
Drills -Tooling
step drills
plexi point
counter bore
plug cutter

Tenon cutters

Brad Points

Wood Augers Treated Timbers
sea walls
log home const
glulam
epee, Brazilian Wood
bridge construction.

Timber Drills
Counter Bores
Counter Sinks
utility poles
Fiberglass poles
R/R ties
wood core
special mfg needs

Shipping Information

Maintenance Welding
Alloyed. Cast Iron,
Aluminum, Steel
Brass, High Strength

Fractional-Decimal Convergence Chart

HSS & Cobalt
Special Pricing

Drill Feed and Speed Chart

American workers With American Skills For Today's World! Lets try to Build a Better Economy and World for tomorrow-Together!

Magnetic base drills, also known as mag drills are used for drilling steels and all other metals fast and accurate. Cutting on the job site or in the shop, Designed for continuous operation, portable magnetic drills are ideal for drilling in any position fast and consistently . We offer the most compact and powerful series of portable Electric, Hydraulic, and Pneumatic magnetic base drill machines manufactured today that will cut up to a 5 inch diameter.

Magnetic Drills for cutting diameters and applications. Both portable and multi gang applications. From 7/16" to 5" diameters and to 5" Depth cuts.

Portable Electric Magnetic Drills - CSU-100/3RL and CSU-100/3DRL

Powerful reversible motor for drilling and tapping - holes up to 4 " dia.

Lightweight, two-speed high-performance mag drill

Model CSU-100/3RL has a powerful reversible motor for drilling and tapping. It's 10" stroke is ideal for drilling structural steel.

Model CSU100/3DRL has a swivel base for movement through 30� and 3/4".

Standard equipment includes Auto Chuck cutter holder, carrying case^�, safety chain, Carrabin hook and Allen keys.

^� Steel case intended mainly for shipping purposes.

Cutter capacity up to
4" dia., stroke: 10"

capacity up to 1-1/4" dia., stroke: 6-1/2" w/chuck

Tapping capacity up to 1-1/8" dia.

� Variable-speed, high-torque 16 Amp motor
with 2 gears (40-140 and 120-480 RPM)
� Multiple speeds match cutter dia. to correct RPM to increase life
� Robust machine with 10" stroke is ideal for drilling structural steel
� High-density dual-coil magnet has holding strength of 6600 lbs.
� Cut up to 4" diameter holes with Annular Cutters
� Mechanical slip clutch disconnects the transmission
in case of overload
� Variable torque control regulates power output
� Automatic lubrication system
� Optional arbor available for cutters with 1-1/4" Weldon shanks
� MT3 output spindle; 11-1/4" max. stroke
� Optional Power Assist to maintain
maximum RPM under full load (Part No. 020.0336)
� One-year warranty

Pricing below Wholesale
E mail us or call us
407-478-2487

Model No.:	CSU-100/3RLand CSU-100/3DRL
Motor Power:	16 Amp / 110 Volt*
Weight:	57 lbs.
Hole Capacity:	4" dia.
Twist Drill Capacity:	1-1/4" dia.
Tapping Capacity:	3/16"-1-1/8" dia.
Speeds:	40-140 RPM and 120-480 RPM
Magnet Base Size:	9" L x 4 " W
Dimensions:	19-1/2" H x 13-3/8 " L x 7-1/2" W
Magnetic Force (1" Plate):	6600 lbs.
Arbor Bore:	3/4" **
Automatic Lubrication:	Included
Swivel Base :	Order Model CSU 100/3DRL
220 Volt / 50Hz also available 1-1/4" also available **Power Assist Part No. 020.0330

Optional Swivel Base (Model CSU-100/3DRL) provides movement through 30� and 3/4".


Twist Drilling	Tapping	Reaming

E Pricing below Wholesale
E mail us or call us
407-478-2487

MAB 1300 � Portable Magnetic Drill Drill large holes
� up to 5-1/8" diameter Tapping up to 1-5/8" diameter

MAB 1300 Portable Magnetic drill motor for holes up to 5-1/8-in. dia.

Powerful and Reliable

20 Amp double-insulated motor
34-1/2" high, 112 lbs.
4-speed oil bath gearbox for applications requiring high power
Designed for continuous use
Infinitely variable torque control and full-wave control electronics

Drill up to 5-1/8" dia. and tap up to 1-5/8" dia.

Uses annular cutters
7/16" to 5" diameter, 1" and 2" depth
13/16" to 4-3/4" diameter, for 4" depth
Twist drilling up to 1-3/4" � uses MT4, countersinking up to 3" diameter
Tapping up to 1-5/8"
Reaming up to 2"
Automatic internal lubrication

Integrated Safety

Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Equipped with Electronic Safety Shutoff Sensor
Emergency-off function
� One-year warranty

Ideal for use with TCT Carbide Cutters on mag drills

Ideal for use with TCT Carbide cutters (9-Series) up to 5-1/8" dia.

4 Gears with Variable Speed for Twist Drilling, Tapping, Reaming and Special-Purpose Cutting

Twist Drill / Countersink � 1-3/4" / � 3"

4-gear Variable Speed rpm30-80, 50-120, 130-350,

Pricing below Wholesale
E mail us or call us
407-478-2487

Model MAB 1300 Specifications
Motor Power	20 Amp / 110 Volt
Weight	112 lbs.
Hole Capacity	5-1/8" dia.**
Twist Drill Capacity	1-3/4" dia.
Tapping Capacity	1-5/8" dia.
Speeds	30-80, 50-120, 130-350, 210-550 RPM
Magnet Base Size	4-3/4" W x 14" L
Dimensions	34-1/2" H x 19-1/2" L x 10" W
Magnetic Force (1" plate)	23,600 lbs.
Arbor Bore	1-1/4" (3/4" adapter available)
Automatic Lubrication	Included

* 220 Volt / 50 Hz also available ** Maximum hole diameter is with TCT

Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case**
1 Safety chain
1 Hexagon socket screw key SW6
1 Drift key MT3
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.

** Steel case intended mainly for shipping purposes.

MDM-40 � Compact Portable Magnetic Drill

Heavy-duty compact hole
drilling machine with internal
cable rou MAB 1300 mag drill application image

ting Powerful and Reliable

9.25 Amp double-insulated motor
Compact, 13" high
Lightweight, 24 lbs.
Designed for continuous use
Intelligent electronic torque control

Drill up to 1-1/2" dia.

Uses annular cutters
Integrated cutting oil reservoir
Automatic internal lubrication
� One-year warranty

Pricing below Wholesale
E mail us or call us
407-478-2487

Special feature

Internal cable routing protects the motor power cord from external damage

All high-density dual-coil magnets are ground, not cast, and are wound into two circles to increase the surface area and density of the magnetic field.

Cutter
Capacity<
1-1/2" Cutter Capacity 3-1/8" Stroke Length Speed: 440 RPM

Model MDM-40 Specifications
Motor Power	9.25 Amp / 110 Volt
Weight	24 lbs.
Hole Capacity	1-1/2" dia.
Speed	440 RPM
Magnet Base Size	6-1/2" L x 3-1/4" W
Dimensions	13" H x 9-1/2" L x 7" W
Magnetic Force (1" plate)	2640 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel carrying case**
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.
** Steel case intended mainly for shipping purposes.

MODEL MAB425 � PORTABLE MAGNETIC DRILL

High-speed Portable Magnetic Drill - MAB 425

< High speed and two gears for cutting and
twist drilling Powerful and Reliable

9.25 Amp double-insulated motor
15.5" high, 29 lbs.
High speed, 2-speed gearbox, ideal for annular cutters and twist drills
Designed for continuous use
Intelligent electronic torque control

Drill up to 1-3/8" dia.

Uses annular cutters
Twist drilling up to 5/8" diameter with optional chuck (IBK-17)
Integrated cutting oil reservoir
Automatic internal lubrication

Integrated Safety

Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function. Pricing below Wholesale
E mail us or call us
407-478-2487

TCT Hornet Sintered Carbide Annular Cuttersfor magnetic drills

With a 1/2" chuck (left, Part No. IBK-17), this model easily converts to a standard drill press with a 7-1/2" stroke for conventional twist drills.

The high speed of the MAB 425 is a great match for the TCT Hornet series of sintered carbide annular cutters.

MAB 425 Portable Magnetic Drill Dimensions

Model MAB 425 Specifications
Motor Power	9.25 Amp / 110 Volt
Weight	29 lbs.
Hole Capacity	1-3/8" dia.
Twist Drill Capacity	5/8" dia.
Speeds	430 / 760 (2 gears)
Magnet Base Size	3-1/3" W x 6-5/8" L
Dimensions	15-1/2" H x 11-1/2" L x 6-1/3" W
Magnetic Force (1" plate)	3080 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Molded plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.

Lightweight, portable electric magnetic drill

Model ECO-32 is lightweight and portable, and has the best power-to-weight performance in the industry.

Model ECO-32AK has an automatic cooling/lubrication system built into the arbor.

Standard equipment includes carrying case, safety chain, Carrabin hook and Allen keys.

Cutter capacity up to
1-1/4 dia.,
stroke: 5-3/4"

Twist drill capacity up to 1/2" dia.,
stroke: 7-1/2"

Portable Magnetic Drill

CSU-32 AC and CSU-32 RL
Best power-to-weight ratio in the industry

� Lightweight and portable at only 24 lbs.
� Compact height of 14-1/4" for drilling in tight spaces
� Strong 8.2 Amp double-insulated motor
� High-density dual-coil magnet has holding strength of 3080 lbs.
� Drills up to 1-1/4" diameter holes with Annular Cutters; up to 1/2" with twist drills
� Optional Power Assist to maintain maximum RPM under full load (Part No. 020.0330)
� One-year warranty

Model No.:	*CSU-32 AC and CSU-32 RL*
Motor Power:	8.2 Amp / 110 Volt*
Weight:	24 lbs.
Hole Capacity:	1-1/4" dia.
Twist Drill Capacity:	1/2" dia.
Speed:	450 RPM
Magnet Base Size:	6-5/16" L x 3-1/4" W
Dimensions:	14-1/4" H x 9-1/2" L x 4-3/8" W
Magnetic Force (1" Plate):	3080 lbs.
Arbor Bore:	3/4"
Manual Lubrication:	Order ModelCSU-32 AC
Automatic Lubrication:	Order ModelCSU-32 RL
220 Volt / 50Hz also available *Power Assist Part No. 020.0330

Pricing below Wholesale
E mail us or call us
407-478-2487

Convert to a standard drill press for conventional twist drills

With a 1/2" chuck (Part No. IBK-17), these models easily convert to standard drill presses with a 7-1/2" stroke for conventional twist drills.

Portable Magnetic Drill - CSU-30/AC

Ultra-compact and lightweight with power assist - holes up to 1-1/8" dia.

Model CSU-30/AC includes patented power assist mechanism to reduce load on motor and cutter.

Ultra-compact, lightweight portable magnetic drill standard equipment

Standard equipment includes auto lubrication, carrying case, chip guard, safety chain, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.

	Cutter capacity up to 1-1/8" dia., stroke: 2-3/4"

� Compact height of 12-1/4"
� Lightweight at 22 lbs.
� Patented power-assist mechanism reduces feed pressure
to help prevent motor burn-out and cutter breakage
� Strong 7.5 Amp double-insulated motor
� Powerful high-density dual-coil magnet
has superior holding strength of 3300 lbs.
� Drills up to 1-1/8" diameter holes with Annular Cutters
� One-year warranty

ECO-30/3P magnetic base drill includes integrated auto-lubrication system.

Model CSU-30/AC has an integrated auto-lubrication system.

Pricing below Wholesale
E mail us or call us
407-478-2487

Model No.:	*CSU-30/AC*
Motor Power:	7.5 Amp / 110 Volt*
Weight:	22 lbs.
Hole Capacity:	1-1/8" dia.
Speed:	450 RPM
Magnet Base Size:	6-3/8" L x 3-1/4" W
Dimensions:	12-1/4" H x 9-3/8" L x 6-3/8" W
Magnetic Force (1" Plate):	3300 lbs.
Arbor Bore:	3/4"
Automatic Lubrication:	Included
*220 Volt / 50Hz also available

Portable Magnetic Drills - CSU-50 AC and CSU-50 RL

Lightweight, two-speed high-performance drill - holes up to 2 " dia.

Lightweight, two-speed high-performance magnetic base drill

Model CSU-50AC is a lightweight, two-speed high-performance drill.

Model CSU-50RL has an automatic cooling/lubrication system built into the arbor.

Standard equipment includes Auto Chuck cutter holder, carrying case, safety chain, carabin hook and allen keys.

Cutter capacity up to
2" dia., stroke: 6"

Twist drill capacity up to 7/8" dia., stroke: 5"

� cuts up to 2" diameter holes with Annular Cutters
� Lightweight and portable at 29 lbs.
� Strong 10.5 Amp motor and two-speed gearbox
� HD dual-coil magnet has holding strength of 3750 lbs.
� Easy "twist and lock" keyless arbor for cutters
� Compact height of 16-1/2" allows drilling in small spaces
� With a 3/4" chuck (Part No. IBK-22), these models easily convert to standard drill presses with a 5" stroke for up to 7/8" dia. twist drill
� Optional Power Assist to maintain maximum RPM under full load (Part No. 020.0330)
� One-year warranty

Model No.:	CSU-50 AC and CSU-50 RL
Motor Power:	10.5 Amp / 110 Volt*
Weight:	29 lbs.
Hole Capacity:	2" dia.
Twist Drill Capacity:	7/8" dia.
Speeds:	Gear 1: 250 RPM, Gear 2: 450 RPM
Magnet Base Size:	6-1/2" L x 3-1/2" W
Dimensions:	16-1/2" H x 9" L x 6-3/8" W
Magnetic Force (1" Plate):	3750 lbs.
Arbor Bore:	3/4"
Manual Lubrication:	Order Model CSU-50AC
Automatic Lubrication:	Order Model CSU-50RL
220 Volt / 50Hz also available *Power Assist Part No. 020.0330

IBK-22 chuck to convert to standard drill press magnetic drill applications

With a 3/4" chuck (Part No. IBK-22) or MT2, these models easily convert to standard drill presses with a 5" stroke for conventional twist drills.

Portable Magnetic Drills - CSU-80AC

Powerful high-torque motor with multiple speeds - holes up to 3-3/16 " dia.

Lightweight, two-speed high-performance drill magnetic base

� Robust, high-torque 15 Amp motor with four-speed gearbox (100 / 175 / 245 / 385 RPM)
� Multiple speeds match cutter diameter to correct RPM to provide increased tool life and reduced cutter breakage
� High-density dual-coil magnet has holding strength of 7040 lbs.
� Cuts up to 3-3/16" diameter holes with annular cutters and 1-1/4" with twist drills
� Keyless arbor for annular cutters
� Mechanical slip clutch disconnects the transmission in case of overload
� Automatic lubrication system
� MT3 output spindle has 11-1/4" max. stroke
� Optional Power Assist to maintain maximum RPM under full load ( Part No. 020.0336)
� One-year warranty

Model No.:	CSU-80AC
Motor Power:	15 Amp / 110 Volt*
Weight:	57 lbs.
Hole Capacity:	3-3/16" dia.
Twist Drill Capacity:	1-1/4" dia.
Speeds:	100 / 175 / 245 / 385 RPM (4 gears)
Magnet Base Size:	9" L x 4-3/8" W
Dimensions:	19-1/2" H x 13-3/8" L x 7-1/2" W
Magnetic Force (1" Plate):	7040 lbs.
Arbor Bore:	3/4" **
Automatic Lubrication:	Included
220 Volt / 50Hz also available * 1-1/4" also available ***Power Assist Part No. 020.0336

Model CSU-80AC has a powerful, high-torque motor
with multiple speeds to
match the cutter diameter
to the correct RPM.
This provides increased
tool life and reduced cutter breakage.

CSU-80AC has an automatic cooling/lubrication system
built into the arbor.

Kit carring case for mag drill 435

Standard equipment includes Auto Chuck cutter holder, carrying case^�, safety chain and Carrabin hook.

^� Steel case intended mainly for shipping purposes.

Standard equipment includes Auto Chuck cutter holder, carrying case^�, safety chain and Carrabin hook.

^� Steel case intended mainly for shipping purposes.

Cutter capacity up to
3-3/16" dia.

Twist drill capacity up to 1-1/4" dia., stroke: 6-1/2" w/chuck

Powerful reversible motor for drilling and tapping - holes up to 5" dia.

Tripl arbor bearing guidance for drilling up to 5" dia. mag drills

Model CSU-130AK has a triple arbor bearing guidance for drilling holes up to 5" dia.

Standard equipment includes carrying case, safety chain, Carrabin hook and Allen keys.

Optional 3/4" arbor adapter, P/N IBK-32/19

Cutter capacity up to 5" dia.

� Strongest magnetic drill press in its class
� Variable-speed and two gears (40-140 and 120-480 RPM)
� Multiple speeds match cutter diameter to correct RPM
� 3-1/3" stroke with special triple arbor bearing guide
� Powerful, high-torque 16 Amp motor with reverse
� Variable torque control regulates power output
� HD dual-coil magnet has holding strength of 10,560 lbs.
� Drills up to 5" diameter holes with TCT Annular Cutters
� Mechanical slip clutch disconnects the transmission in case of overload
� Automatic lubrication system
� Optional Power Assist to maintain maximum RPM under full load
(Part No. 020.0336)
� One-year warranty


Triple arbor bearing guide ensures stability for large-diameter hole drilling.		Ideal for use with large-diameter Tungsten Carbide-tipped (TCT) cutters.

Pricing below Wholesale
E mail us or call us
407-478-2487

Model No.:	CSU-130A
Motor Power:	16 Amp / 110 Volt*
Weight:	79 lbs.
Hole Capacity:	5" dia.
Speeds:	40-140 RPM and 120-480 RPM
Magnet Base Size:	9-1/2" L x 4-3/4" W
Dimensions:	26-1/4" H x 13-3/8 " L x 7-1/2" W
Magnetic Force (1" Plate):	10,560 lbs.
Arbor Bore:	1-1/4" **
Automatic Lubrication:	Included
220 Volt / 50Hz also available 3/4" also available, Part No. IBK-32/19 **Power Assist Part No. 020.0336

mModel MAB 455 Drill up to 2" dia.

High-power Magnetic Drill Machine - MAB 455

High power with keyless quick-change chuck system

Powerful and Reliable

10.5 Amp double-insulated motor
17-1/4" high, 29 lbs.
High speed, 2-speed gearbox, ideal for annular cutters and twist drills
Designed for continuous use
Intelligent electronic torque control

Drill up to 2" dia.

Uses annular cutters
Twist drilling up to 7/8" diameter (with optional chuck IBC 22)
Integrated cutting oil reservoir
Automatic internal lubrication

Keyless Cutter Mount

Quick-change keyless cutter system for 3/4" Weldon shank

Integrated Safety

Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function
� One-year warranty

5" Stroke
Pricing below Wholesale
E mail us or call us
407-478-2487

With a 3/4" chuck (left, Part No. IBC 22), or MT2, this model easily converts to a standard drill press with a 5" stroke for conventional twist drills.

Cutter
Capacity

� 2"Twist Drill /
Countersink

� 7/8"

Stroke (length)

6-1/3"

Speed Range (RPM)

250 / 450

Magnet Force Indicator

Safe Mag�

Model MAB 455 Specifications
Motor Power	10.5 Amp / 110 Volt
Weight	29 lbs.
Hole Capacity	2" dia.
Twist Drill Capacity	7/8" dia.
Speeds	250 / 450 RPM (2 gears)
Magnet Base Size	3-1/3" W x 6-5/8" L
Dimensions	17-1/4" H x 11-5/8" L x 7" W
Magnetic Force (1" plate)	3750 lbs.
Arbor Bore	3/4"
Spindle	MT2
Automatic Lubrication	Included

* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system KEYLESS Weldon 3/4"
2 Pilot pins � 1" and 2" depth
1 Safety chain
1 Drift key MT2
1 Operating manual
1 Warranty certificate
Standard Equipment also includes molded plastic carrying case, auto lubrication, safety strap, carabin hook, gloves, safety glasses, ear protection and Allen keys.

Back to index

Portable Pneumatic Magnetic Drills
AIRBOR� AB-4300

AB-4300 Portable Pneumatic base and drill motor for Hazardous Environments

Motor and magnet are powered completely by compressed air

Pneumatic power for hazardous environments

� holes up to 2-1/16" dia. Safe and Reliable

Inherently safer than electromagnetic cuts in

hazardous atmospheres and wet environments

where electricity requires "hot work permits"
ATEX approved
Industry's first completely air-operated magnetic drill � no electricity!
Fail-safe permanent magnet is activated "on" and "off"
by air pressure; in the event of a loss of air flow, the magnet will not disengage
1600 lbs. magnet holding strength

Motor and magnet are powered completely by compressed air
Pricing below Wholesale
E mail us or call us
407-478-2487

Cut up to 2-1/16" dia.
Twist drilling up to 5/8"
Powerful 1.6 HP drill motor
Long drill stroke � up to 10-1/4"

Pressurized coolant system lubricates cutter and reduces risk of sparking

AB-4300 converted to a standardhydraulic base and motor drill press

With a geared chuck adapter (Part No. IBK-18) and extra rack
(Model No. AB-4300-2R), AIRBOR� easily converts to a
standard drill press with a 7-1/2" stroke.AB-4300-2R shown with extra
rack up (left) and extra rack down (right).
hydraulic base and drill motor drill with extra rack up and down

hydraulic base and drill motor drill with extra rack up and down

Stroke (length)Up to 10-1/4" drill stroke

Model AB-4300-2 / AB-4300-2R Specifications
Motor Power (Pneumatic)	1.6 HP
Air Consumption	64 CFM
Hole Capacity	2-1/16" dia.
No Load Speed	400 RPM
Magnet Base Size	8-3/4" W x 3-1/2" L
Dimensions	13-1/2" H x 12-1/2" L x 4-3/4" W
Magnetic Force (1" plate)	1600 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
Stroke Length 4-7/8"	Order Model AB-4300-2
Stroke Length 10-1/4"	Order Model AB-4300-2R

Model Comparison
AB-4300-2R		AB-4300-2
*Drill Stroke*
w/cutters	w/chuck	w/cutters	w/chuck
10-1/4"	7-1/2"	4-7/8"	1-3/4"
*Height*
closed	open	closed	open
13-1/2"	22"	13-1/2"	17-1/2"
*Weight*
lbs.	kg	lbs.	kg
43	20	38	18

Portable Hydraulic Magnetic Drill � HB-4400
Hydraulic for marine and construction � works underwater
holes up to 2-1/16" dia.

HB-4400 Portable Hydraulic base and motor for Marine and Construction

Hoses not included

Safe and Reliable

Ideal for industrial, construction, marine and mining applications
Drill structural steel and other metals
Hydraulic motor safe for underwater use �
view action shots of the HB-4400 being used

to attach steel repair plates to underwater pylons
Stainless steel construction resists corrosion
Manually operated permanent magnet with ratchet control has holding strength of 1300 lbs.

Drill up to 2-1/16" dia.

Uses annular cutters
Twist drilling up to 1/2"
Automatic lubrication

HB-4400 with 3/4" chuck for magnetic press conversion

Pricing below Wholesale
E mail us or call us
407-478-2487

With a 3/4" chuck (Part No. 602045A), this model easily converts to a standard drill press with a 3" stroke.

Model HB-4400 Specifications
Motor Power (Hydraulic)	1.5 HP
Weight	48-1/2 lbs.
Hole Capacity	2-1/16" dia.
Twist Drill Capacity	1/2" dia.
No Load Speed, Variable	0-630 RPM
Hydraulic Supply	Flow 6.5 GPM @ 2000 PSI
Magnetic Force (1" plate)	1300 lbs.
Automatic Lubrication	Included

MAB MAB 150 � Portable Magnetic Drills LOW PROFILE
Horizontal motor mount for drilling in tight spaces

Horizontal Directional magnetic Drilling Machine - MAB 150

Powerful and Reliable

9.25 Amp double-insulated motor
Ultra compact, 7" high
Lightweight,
24 lbs.
Designed for continuous use
Intelligent electronic torque control

Drill up to 1-1/2" dia.*

Integrated cutting oil reservoir

; Automatic internal lubrication

Integrated Safety

Internal cable routing protects the motor power cord from
external damage

Simple, ergonomic arrangement of controls for
One-handed operation
Emergency-off function
� One-year warranty

* Model MAB150 accepts cutters with a 3/4" Weldon shank
and has a maximum
depth of cut of 1".

Pricing below Wholesale
E mail us or call us
407-478-2487

Optional ratchet-style advancing mechanism for work in spaces
with limited clearance.

Switches for power and magnet adhesion are arranged for simple,
uncomplicated operation.

Cutter
Capacity 1-1/2" Cutter Capacity

Model MAB 150 Specifications
Motor Power	9.25 Amp / 110 Volt
Weight	24 lbs.
Hole Capacity	1-1/2" dia.
Speed	400 RPM
Magnet Base Size	6-5/16" L x 3-3/16" W
Dimensions	7" H x 12-7/8" L x 7-1/2" W
Magnetic Force (1" plate)	2640 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel carrying case**
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.
** Steel case intended mainly for shipping purposes.

MMAB 825 and MAB 845 � Portable Magnetic Drills

MAB 825/845 Portable Magnetic Drill for steel engineering, plant construction and more.

Model MAB 845 features a swivel base providing 30� movement left and right and 3/4" forward and backward.

Ideal for steel engineering, plant construction and more Powerful and Reliable

16 Amp double-insulated motor
4-speed oil bath gearbox for applications requiring high power
Designed for continuous use
Infinitely variable torque control and full-wave control electronics

Drill up to 4" dia. and Tap up to 1-1/8" dia.

Uses annular cutters
Twist drilling and reaming up to 1-1/4" dia.
Tapping capacity 1-1/8" dia.
Countersinking up to 2"
Integrated cutting oil reservoir
Automatic internal lubrication

Keyless Cutter Mount

Quick-change keyless cutter system for 3/4" Weldon shank

Integrated Safety

Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function
� One-year warranty

4 Gears with Variable Speed - Twist Drilling, Tapping, Reaming, Countersinking with mag drills

Pricing below Wholesale
E mail us or call us
407-478-2487

Models MAB 825 and MAB 845 Specifications
Motor Power	16 Amp / 110 Volt
Weight	55 lbs.
Hole Capacity	4" dia.
Twist Drill Capacity	1-1/4" dia.
Tapping Capacity	1-1/8" dia.
Speeds	40-110, 65-175, 140-360, 220-600 RPM
Magnet Base Size	4-1/3" W x 8-5/8" L
Dimensions	22-1/8" H x 14-7/16" L x 9-7/16" W
Magnetic Force (1" plate)	6600 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
Swivel Base	Order Model MAB 845

* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system KEYLESS
4 Pilot pins - 1", 2", 3" and 4" depth
1 Safety chain
1 Hexagon socket screw key SW 6
1 Drift key MT3
1 Warranty certificate
Standard Equipment also includes steel carrying case**, operating manual, auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.

** Steel case intended mainly for shipping

Auto MAB 1500 � Portable Magnetic Drill

Heavy-duty compact drill with automatic feed Internal Cable Routing

Powerful and Reliable

10.5 Amp double-insulated motor
Compact, lightweight and portable: 16-1/8" high, 37-1/2 lbs.
Power feed automatically controls drill pressure to maintain optimal RPM and feed rate
Designed for continuous use
Ideal hole cutting machine for steel fabricators, contractors and plant maintenance professionals

Drill up to 1-1/2" dia.

Uses annular cutters
Automatic feed mechanism with automatic stop and manual retraction
Integrated cutting oil reservoir
Automatic internal lubrication

Integrated Safety

Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function
� One-year warranty

Series Drilling set up of magnetic drills

Portable Magnetic Drill with Automatic Feed

Model Auto MAB 1500

Pricing below Wholesale
E mail us or call us
407-478-2487

Model Auto MAB 1500 Specifications
Motor Power	10.5 Amp / 110 Volt
Weight	37-1/2 lbs.
Hole Capacity	1-1/2" dia.
Speed	360 RPM
Magnet Base Size	3-1/2" W x 7-1/8" L
Dimensions	16-1/8" H x 11" L x 7-13/16" W
Magnetic Force (1" plate)	2640 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case**
1 Safety chain
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, Carrabin hook, gloves, safety glasses, ear protection and Allen keys.

** Steel case intended mainly for shipping purposes.

Portable Magnetic Drills - CSU-100/3RL and CSU100/3DRL

Powerful reversible motor for drilling and tapping - holes up to 4 " dia.

Variable-speed, high-torque 16 Amp motor with 2 gears (40-140 and 120-480 RPM)
� Multiple speeds match cutter dia. to correct RPM to increase life
� Robust machine with 10" stroke is ideal for drilling structural steel
� High-density dual-coil magnet has holding strength of 6600 lbs.
� Drills up to 4" diameter holes with Annular Cutters
� Mechanical slip clutch disconnects the transmission in case of overload
� Variable torque control regulates power output
� Automatic lubrication system
� Optional arbor available for cutters with 1-1/4" Weldon shanks
� MT3 output spindle; 11-1/4" max. stroke
� Optional Power Assist to maintain maximum RPM under full load (Part No. 020.0336)
� One-year warranty

ModelCSU-100/3AL has a powerful reversible
motor for drilling and tapping. It's 10" stroke

Cutter capacity up to
4" dia., stroke: 10"

Twist drill capacity up to 1-1/4" dia., stroke: 6-1/2" w/chuck

Tapping capacity up to 1-1/8" dia.

is ideal for drilling structural steel.

Pricing below Wholesale
E mail us or call us
407-478-2487

Standard equipment includes Auto Chuck cutter holder, carrying case^�, safety chain, Carrabin hook and Allen keys.

^� Steel case intended mainly for shipping purposes.

MAB 425 � High-speed Portable Magnetic Drill

High speed and two gears for cutting and twist drilling

Powerful and Reliable

9.25 Amp double-insulated motor
15-1/2" high, 29 lbs.
High speed, 2-speed gearbox, ideal for annular cutters and twist drills
Designed for continuous use
Intelligent electronic torque control

Drill up to 1-3/8" dia.

Uses annular cutters
Twist drilling up to 5/8" diameter with optional chuck (IBC 17)
Integrated cutting oil reservoir
Automatic internal lubrication

Integrated Safety

Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function
� One-year warranty

With a 1/2" chuck (left, Part No. IBC 17),

this model easily converts to a standard

drill press with a 7-1/2" stroke for conventional twist drills.

TCT Hornet Sintered Carbide Annular Cutters

The high speed of the MAB 425 is a great match

for the TCT Hornet series of sintered carbide annular cutters.

Cutter Capacity � 1-3/8"

Twist Drill /
Countersink � 5/8"

Stroke
(length) 6-1/3"

Speed Range(RPM) 430 / 760

Magnet Force
Indicator

SafeMag�

Model MAB 425 Specifications
Motor Power	9.25 Amp / 110 Volt
Weight	29 lbs.
Hole Capacity	1-3/8" dia.
Twist Drill Capacity	5/8" dia.
Speeds	430 / 760 (2 gears)
Magnet Base Size	3-1/3" W x 6-5/8" L
Dimensions	15-1/2" H x 11-1/2" L x 6-1/3" W
Magnetic Force (1" plate)	3080 lbs.
Arbor Bore	3/4"
Automatic Lubrication	Included
* 220 Volt / 50 Hz also available

Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Molded plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Standard Equipment also includes auto lubrication, safety strap, carabin hook, gloves, safety glasses, ear protection and allen keys.

"Magnetic portable drills- electric, Underwater portable magnetic,
Hydraulic, Jancey Slugger cutters, center free cutters,
Hougan mag drill machine, mag machine,
cs unitec, rotabroach, cutter, Hougen, slugger, portable drill, holes,
annular cutter, steel, hole cutter, magnetic base drill, drill press,
hydraulic industrial, Mag, magnetic machine, Underwater pneumatic,
hydraulic motors, Demolition portable air tools, sheet metal cutters,
Hougen-Ogura hydraulic hole punches. These are just some of the

machines and accessories we supply. Advantage Drills Incorporated.

Portable Magnetic drills, mag drills, pneumatic magnetic base drills,
pneumatic mag drills, Portable electric mag drills, Underwater portable
magnetic drills, hydraulic drills, Jancey Slugger cutters, center free cutters,
Hougan mag drill machine, mag machine, cs unitec, rotabroach, cutter,
Hougen, slugger, portable drill, holes, annular cutter, steel, hole cutter,
rotobroach cutters, magnetic base drill, hydraulic drills, hydraulic industrial,
Mag drills, magnetic machine, Underwater pneumatic drill, hydraulic drill motors,
Demolition portable air tools, sheet metal cutters,
Hougen-Ogura hydraulic hole punches.

Back Home

;

� �1990, 2013,Advantage Drills, Inc.
Warranties and Policies "IN GOD WE TRUST!"

MODEL MAB425 � PORTABLE MAGNETIC DRILL

mModel MAB 455 Drill up to 2" dia.

High power with keyless quick-change chuck system

Powerful and Reliable

Drill up to 2" dia.

Keyless Cutter Mount

Integrated Safety

CutterCapacity

� 2"Twist Drill /Countersink

� 7/8"

Stroke (length)

6-1/3"

Speed Range (RPM)

250 / 450

Magnet Force Indicator

Safe Mag�

Model MAB 455 Specifications

Standard Equipment

Portable Pneumatic Magnetic Drills AIRBOR� AB-4300

Model Comparison

Portable Hydraulic Magnetic Drill � HB-4400 Hydraulic for marine and construction � works underwater holes up to 2-1/16" dia.

MAB MAB 150 � Portable Magnetic Drills LOW PROFILE Horizontal motor mount for drilling in tight spaces

Integrated Safety

Pricing below Wholesale E mail us or call us 407-478-2487

MAB 425 � High-speed Portable Magnetic Drill

Powerful and Reliable

Drill up to 1-3/8" dia.

Integrated Safety

Cutter Capacity � 1-3/8"

Twist Drill /Countersink � 5/8"

Stroke(length) 6-1/3"

Speed Range(RPM) 430 / 760

Magnet ForceIndicator

Model MAB 425 Specifications

Standard Equipment

Cutter
Capacity

� 2"Twist Drill /
Countersink

Portable Pneumatic Magnetic Drills
AIRBOR� AB-4300

Portable Hydraulic Magnetic Drill � HB-4400
Hydraulic for marine and construction � works underwater
holes up to 2-1/16" dia.

MAB MAB 150 � Portable Magnetic Drills LOW PROFILE
Horizontal motor mount for drilling in tight spaces

Pricing below Wholesale
E mail us or call us
407-478-2487

Twist Drill /
Countersink � 5/8"

Stroke
(length) 6-1/3"

Magnet Force
Indicator