If it's Manufactured, We'll Have it, or Manufacture it for you! We Do Custom Tooling for all Applications, Large or Small.

High-Strength Joining and Buildup

Advantage Alloy Inc. - Steel Vantage-2A

High Alloy and Dissimilar Steels - AC or DC

120,000 psi all ferrous and non-ferrous metals, Simmilar and Dissimilar Steels.
High-Strength Arc Rods Tig & Mig Wire

CHARACTERISTICS

A premium electrode designed to produce the highest tensile strength.
Produces low heat input.
Welds are smooth and porosity free without undercut or splatter,
in all positions.
Virtually no side arcing.

Can be used for practically all maintenance repairs.
Excellent for critical applications where high strength and impact resistance are required.
Can be used on all steels . spring, cast, mild, medium,& high carbon,steels.V-55, NAX, High tinsle.
Use this rod for build up prior in hard facing and welding similar and dissimilar steels.
Will weld over paint, grease, rust, dirt. No pin holes or undercutting. Crack free.
Works well on cast steel. Provides the solution for removal of broken studs 

PROCEDURES

Remove all foreign material from the joint area.
Heavy sections should be notched to form a 90 degree vee.
High carbon  steel should be preheated to approximately 400 degrees Fahrenheit.
Use stringer boards to prevent over heating. Allow parts to cool slowly. Maintain a short arc.

TECHNICAL

Tensile Strength - 120,000 PSI works hardens to 180,00 PSI
Elongation - Over 37%         Current - AC / DC (reverse)
Sold in 11 Lb  Tubes. Rods are Moisture Resistant !

HOME