| If it's Manufactured, We'll Have it, or Manufacture it for you! All Tooling : AMERICAN MANUFACTURED, MADE IN USA !
Custom and Standard Quality American Manufactured Tooling, for all Applications Large or Small. Specialists for Specific Needs and Tooling. |
|
HSS Twist Drill Bits
(m-1,m-2,m-7)
metal working Tooling
Micro, Metric, Fractional,
number, letter
tapered, extra long,
over sized,
All Metal Working Tooling
and custom needs
Cobalt/Carbide
Drill bits and Tooling.
micro, Letter, Number,
Fractional, Metric, specials
Reamers
Core Drills,
Counter Sinks
custom needs
Diamond core drills
Glass Porcelain
Ceramic, Tile
router-jig-finishing Tooling Custom design and mfg specials. Metal bonded, plated braze bonded
Diamond Drill Bits
Carbon Composite
Stone Cutting Tooling
micro, core, router, pads,
disks, cnc, pcd,
plated, brazed,
metal bond routers
finger bits, drums.
Pneumatic
Hydraulic
Electric
Drill Motors
And Accessories
Portable Magnetic Drills
Masonry
Drill Bits
Chisels' sds, spline,
A & B taper, Hammer,
extra long drills
custom Milled & designed
CONCRETE
Drill Bits
Concrete Drill Bits
and tooling
Asphalt Drills SDS, A&B Taper, Spline, Standard, Ratio.
custom designed
 Diamond Cores
wet & dry
saw blades
core rigs
Hurricane Anchor Drills
Fusebar Reamers
 
Fiberglass, Plastics
Wood Working
Drills Bits -Tooling
step drills
plexi point
counter bores
plug cutters
Router bits,
Forstner Bits
Hole saw
Saw blades carbide
Tenon cutters
Brad Point Drill Bits
Wood Augers Treated Timbers
sea walls
log home const.
glulam
epée,
Brazilian hard Woods
bridge construction
Utilities, all Treated timbers
 Timber Drills
Counter Bores
Counter Sinks
utility poles
Fiberglass poles
R/R ties
wood core
special mfg needs
USA Shipping Information
Hss & Cobalt Special Pricing
Maintenance Welding
Alloy Steel, Cast Iron,
Aluminum, Steel
Brass, High Strength low temp Moisture resistant!
Fractional-Decimal Convergence Chart
Drill Bit Feed and Speed Chart
| | | |
|
|
| 
Four Flute Countersinks Designed for use in all woods, plastics, and non- ferrous metals. The countersink is held in place with 2 hex socket set screws fastened into the flutes of the drill. This countersink can be mounted on taper point, brad point, and regular point drills. Part Number | Cutting Diameter | Drill Hole Size | Overall Length | ADV-ADV-C2 | 1/4 | 5/64 | 3/4 | ADV-ADV-C3 | 1/4 | 3/32 | 3/4 | ADV-C4 | 5/16 | 7/64 | 7/8 | ADV-C44 | 5/16 | 1/8 | 7/8 | ADV-C65 | 5/16 | 9/64 | 7/8 | ADV-C410 | 5/16 | 5/32 | 7/8 | ADV-C411 | 5/16 | 11/64 | 7/8 | ADV-C43 | 5/16 | 3/16 | 7/8 | ADV-C56 | 3/8 | 3/32 | 7/8 | ADV-C57 | 3/8 | 7/64 | 7/8 | * ADV-C5 | 3/8 | 1/8 | 7/8 | * ADV-C6 | 3/8 | 9/64 | 7/8 | * ADV-C7 | 3/8 | 5/32 | 7/8 | * ADV-C8 | 3/8 | 11/64 | 7/8 | * ADV-C9 | 3/8 | 3/16 | 7/8 | ADV-C913 | 3/8 | 13/64 | 7/8 | ADV-C97 | 3/8 | 7/32 | 7/8 | ADV-C105 | 7/16 | 5/32 | 7/8 | ADV-C1011 | 7/16 | 11/64 | 7/8 | ADV-C103 | 7/16 | 3/16 | 7/8 | * ADV-C10 | 7/16 | 13/64 | 7/8 | ADV-C1014 | 7/16 | 7/32 | 7/8 | ADV-C104 | 7/16 | 1/4 | 7/8 | ADV-C122 | 1/2 | 1/8 | 7/8 | ADV-C129 | 1/2 | 9/64 | 7/8 | ADV-C125 | 1/2 | 5/32 | 7/8 | ADV-C1211 | 1/2 | 11/64 | 7/8 | * ADV-C92 | 1/2 | 3/16 | 7/8 | * ADV-C102 | 1/2 | 13/64 | 7/8 | * ADV-C12 | 1/2 | 7/32 | 7/8 | ADV-C1415 | 1/2 | 15/64 | 7/8 | * ADV-C14 | 1/2 | 1/4 | 7/8 | ADV-C145 | 5/8 | 5/32 | 1-1/16 | * ADV-C143 | 5/8 | 3/16 | 1-1/16 | ADV-C167 | 5/8 | 7/32 | 1-1/16 | * ADV-C16 | 5/8 | 1/4 | 1-1/16 | ADV-C1617 | 5/8 | 17/64 | 1-1/16 | * ADV-C169 | 5/8 | 9/32 | 1-1/16 | ADV-C1619 | 5/8 | 19/64 | 1-1/16 | * ADV-C18 | 5/8 | 5/16 | 1-1/16 | ADV-C243 | 3/4 | 3/16 | 1-1/8 | ADV-C247 | 3/4 | 7/32 | 1-1/8 | ADV-C244 | 3/4 | 1/4 | 1-1/8 | ADV-C245 | 3/4 | 5/16 | 1-1/8 | ADV-C20 | 3/4 | 21/64 | 1-1/8 | ADV-C24 | 3/4 | 3/8 | 1-1/4 | ADV-C284 | 7/8 | 1/4 | 1-1/4 | ADV-C285 | 7/8 | 5/16 | 1-1/4 | ADV-C286 | 7/8 | 3/8 | 1-1/4 | ADV-C287 | 7/8 | 7/16 | 1-3/8 | ADV-C324 | 1 | 1/4 | 1-3/8 | ADV-C326 | 1 | 3/8 | 1-3/8 | ADV-C328 | 1 | 1/2 | 1-1/2 |
* Indicates most popular sizes contained in sets. BACK |
| | |
|
