Masonry /Concrete /counter
bores / demolition
tooling
SDS-Plus /SDS-Max / Hammer
/ Masonry core
spline Hammer / A and B tapered
Standard / Metric Shank/Rock Bits
Percussion Hammer masonry
SDS PLUS Hammer masonry
Ratio Hammer masonry
masonry Demolition Chisels.
Specialized, manufactured tooling for
unusual applications.
Longer lengths as well as larger diameters.
Over 31 Years of Quality Tool Manufacturing!
No One Knows Masonry Drills
More than we do!
------No One!------
Diamond blades /concrete
/masonry /tooling.
Standard, metric, and fractional.
WE'LL HAVE THE TOOLING YOU WILL NEED.
ENGINEERS ARE ALWAYS READY TO ASSIST WITH
ALL QUESTIONS.
If it's one or more,
Call or E-mail us for price and delivery.
Or, go to our live chat for information.
PROPER APPLICATIONS, TOOLING PROBLEMS, DESIGN,
PROPER PROCEDURES
AND PURCHASING THE RIGHT TOOLING.
We will Custom manufacture masonry drills
for your special needs.
We guarantee the lowest prices and best
quality!
prices as low as $.99 for 1/4 x6 masonry
drills.
E mail or Call Us for pricing!
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
American Made!
Tools manufactured for masonry/concrete
drills are designed
for rugged heavy duty us in all conditions.
The specialized
alloyed4140 through hardened steels and
c-2/c-3 carbide
are designed for continuous use in all the
hardest masonry
or concrete. Manufactured in fractional
metric sizes.
Larger diameter and length tooling custom
manufactured to your needs.
" Fast Spiral "
masonry/concrete drills
1/8" to 1"dia.
up to 18" lengths.
These masonry drill bits have a proven Fast
Spiral Drill Bit design, combined with a
special carbide tip and a tough steel alloy
body, allows the Fast Spiral Bit to drill
quickly and cleanly using a standard rotary
drill motor. These Fast Spiral masonry drill
bits has a flute design that allows for
less heat buildup, providing the longest
bit life possible.
"Hammer Percussion"
masonry/concrete drills
1/8" to 1-1/2" diameters: metric sizes also.
(From 2-3/4" to 84"+) lengths
Straight Shank Hammer Bits are designed
for use in hard hitting hammer drills that
utilize a 3-jawed, Jacob’s type chuck. These
Straight Shank Hammer Bits Carbide Tipped
Masonry Drill Bits, feature an extra tough
carbide tipped drill bits that gives outstanding
performance in the roughest drilling applications.
The heat-treated and surface hardened alloy
body, coupled with an extra tough percussion
carbide tip, is designed to stay sharper
longer. The Straight Shank Hammer Drill
Bits design allows for easy factory sharpening
to help extend the life of the bit.
"SDS/PLUS"
masonry/concrete drills
3/16" to 1-1/8"diameters or(4 mm to 28 mm).
up to 38"+ lengths.
The SDS Plus Carbide Tipped Drill Bit feature
the SDS plus versatile Slot Drive System
that fits all rotary hammers that specify
an SDS Plus Shank. Positive drive slots
deliver maximum drilling torque and maximum
hammering energy for faster drilling. We
combined the “Ultra Flute”, an asymmetrical
spiral design with the popular SDS Plus
Shank to achieve a combination that makes
our the fastest drilling carbide-tipped
hammer bit of its type!
"SDS/MAX "
masonry/concrete drills
Designed with Five carbide tips.
3/8" to 1-1/2"diameters and metric.
up to 72-1/2 " + lengths.
SDS Max Drill Bits are Carbide Tipped Masonry
Drill Bits that have a heavy duty slot drive
system that is designed to maximizes the
performance. SDS Max Drill Bits will fit
any rotary hammer that is designed with
an SDS Max ® drive system. has three positive
drive slots and two ball retainer slots
incorporated into the SDS Max ® shank design.
The design in the SDS Max Carbide Tipped
Masonry Drill Bits allow the operator to
drill large diameter holes with ease. The
SDS Max Drill Bits are ® 5/8” diameter or
larger are equipped with a multi-cutter
tip design.
"SPLINE DRIVE"
Hammer Drills
masonry/concrete
3/8" to 1-1/2"diameter standard and metric
sizes also,
up to 108"+ lengths.
The Spline Hammer Bits feature a carbide
tipped and spline drive. Spline Drive drill
bits are held to exacting tolerances to
assure perfect fit as well as maximum impact
and torque transmission. Spline Drill Bits
- are rotary/percussion/hammer carbide tipped
drill bits are industrial drills that are
milled from a single piece of steel and
are designed with maximum strength to provide
maximum life.
"EXTRA LONG MASONRY"
1/4" to 1-1/2"dia.
UP TO 108" lengths
Carbide Tipped long Bell Hanger Drill Bits
or Installer Bits are used in small wire
installation or fishing wire threw holes
that have just been drilled. These installer
bits are carbide tipped. The Bell Hanger
Drill Bits are specifically designed for
small wire installation applications such
as telephone wire installation, security
alarm installation, fire alarm installation,
cable wire installation, data network wire
installation, electricians and other professionals.
All use these unique carbide tipped installer
bits to drill holes through walls, studs
and other obstacles and then use the unique
threw hole, attaches a wire to the installer
bit and fishes the small wire back through
the drilled hole with ease.
"Combination Drills / Counter Sink"
Masonry Hurricane Shutter Installation anchors
1/4 pilot with 1/2 counter bore 3-1/2"
and 5" lengths.
Whether protecting your home, property,
business or loved one, take the Guesswork
Out of Hurricane Shutter Anchors, Storm
Shutter Anchors, and Security Shutter Anchor
Installation...Hurricane Anchor Bits are
Combination masonry drill bits designed
for masonry anchors. These bits are designed
for Hurricane Shutter Anchors or Hurricane
Anchors and are equipped with a carbide-tipped
pilot drill bit, a carbide tipped counter
bore, depth gage collar. Reliable Hurricane
Shutter Installation is easy when Hurricane
Anchors are set to same depth. To install
hurricane anchors just adjust to counter
sinking depth settings. Once the Hurricane
Shutter Anchors depth is adjusted, duplicate
holes with exactly the same depth can be
quickly drilled, one after another! In just
one easy step Hurricane Shutter Anchors
Bits or Hurricane Anchor Bits will repeatedly
drill holes for hurricane anchors lead shields,
as well as a small hole to allow clearance
for the screw or bolt to pass through.
 
Carbide Tipped "Earth Auger "
2" dia to 30 " lengths, 1/2 SHANK
Termite bait station installation and soil
sampling has never been easier. The Carbide
Tipped Earth Auger is ideal for termite
bait station installation or soil sampling.
Armed with a carbide tipped pilot and a
carbide tipped auger flute cutter you will
drill dozens if not hundreds of holes with
this carbide tipped earth auger. The Carbide
Tipped Earth Auger is equipped with a standard
7/16” Hex shank that fits both quick change
chucks and 1/2” Jacobs® Style Chucks.
"TAPCON "
masonry/concrete
5/32",1/4"dia.
anchor/screw installations.
SDS Plus Tapcon Carbide Tipped Drill Bits
are rotary hammer carbide tipped drill bits,
they are specifically designed for use with
Tapcon® concrete screw anchors. Each SDS
Plus Tapcon Carbide Tipped Drill Bit are
precisely sized to match the required tolerances
necessary to achieve maximum holding power
from self threading concrete screws. These
SDS Plus Tapcon carbide tipped drill bits
have a 5/16” hex, immediately below the
shank, that fits directly into the concrete
screw anchor installation tool. SDS Plus
Tapcon - SDS Plus Carbide Tipped Drill Bits
are designed for use with Tapcon® type anchoring
systems that utilize a masonry anchor screw
with a self tapping thread. Constructed
of hardened alloy steel, a close tolerance
carbide tip and a SDS-Plus/ Hex style shank,
the SDS Plus Tapcon Drill Bits will provide
long life and superior performance. The
SDS Plus Tapcon Drill Bits are available
by the piece (Standard Pack) or quantities
of 10 per package (Pro-Pack).
"CARPET STUBBY"
1/8"dia
The Carpet Stubby (Tack Strip Installer
Bits) carbide tipped drill bits will drill
concrete, wood ,or even terrazzo flooring.
The Carpet Stubby (Tack Strip Installer
Bits) is used to drill a hole that allows
the installer to place a nail through the
carpet tack strip into the floor underneath.
These Tack Strip Installer Bits or Carpet
Stubby Bits combine proper nail size and
correct diameter hole to help preventing
carpet tack strip pullout.
"A or B TAPER"
Masonry/concrete
Hammer
(A) Taper 3/16"to 7/8"dia.
(B) Taper 7/16" to 1-1/8"dia.
Taper and B Taper style
masonry drill bits are made especially to
fit our high quality A Taper and B Taper
adapters. The smaller A Taper shanks are
intended for bit diameters from 3/16" to
7/8". B Taper shanks are most effective
in large capacity rotary / percussion hammers
and are available in sizes from 7/16" to
1-1/8" diameters. Taper hammer masonry drill
bits are produced from high grade steel
that is heat treated and tempered to provide
the longest drilling life possible. These
masonry drill bits A Taper and B Taper masonry
drill bits have a asymmetrical spiral flute
design, allows for efficient dust removal
and cooler operating temperatures.
"A or B TAPER ADAPTERS"
For SDS & Spline.
Advantage
Drills provides a complete line of percussion
drill bit accessories of taper chuck adapters
for A & B Taper carbide tipped drill bits
plus a complete line of Taper carbide tipped
drill bits that fit most types of current
production or even discontinued rotary/percussion
hammer models. When A or B Taper Adapters
are combined with A or B Taper carbide tipped
drill bits, costs are held to a minimum.
The common problem of having too many carbide
tipped drill bits of one size and too few
of another is eliminated. A and B Taper
Adapters are produced from high quality
alloy steel and are heat treated for extra
long life. A drift pin is provided with
each adapter at no charge. The drift pin
is used to remove A or B Taper carbide tipped
drill bits from the adapters. Due to changing
models and additions to power tool lines,
other A and B Adapters may be available
but are not shown.
"HAMMER CORE"
masonry/concrete
1"to 6"
Diameters
12 And 18 Inch Lengths.
sds-plus, sds-max, spline, standard shank.
Rotary Core Masonry Drill Bits are a carbide
tipped masonry core bit used in standard
rotary drill motors. Rotary Core Masonry
Drill Bits provide an extremely smooth cutting
action and a clean finished hole. Because
of the negative setting of the carbide cutting
teeth, Rotary Core Masonry Drill Bits can
cut through the toughest and hardest of
aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes
5/8" Diameter to 1-3/8" Diameter are milled
from a single piece of steel. Rotary Core
Masonry Drill Bits sizes 1-1/2" Diameter
and over are manufactured with a replaceable
threaded shank.
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be
used in any 1/2” capacity or larger drill
motor equipped with a three jaw chuck and
a rated no-load speed of 400 R.P.M. to 1,200
R.P.M.. This includes most combination hammer
drills. When using a combination hammer
drill ensure the selector switch is in the
rotary only position!
"Hard Head"
masonry/concrete
1-3/4, 2, 2-1/2, 3 diameters up to 24
" lengths.
sds-plus, sds-max, spline, standard shank.
"HAMMER CORE SHANK ADAPTERS "
to connect 5/8-11, 3/4-10, 1-1/4-7 Thread
(for most all masonry motors)
have a replaceable 3/4-10 threaded coupler
for an extra long working life. You need
only replace the threaded adapter if it
should wear or break. Due to changes and
additions in power tool models, other adapters
may be available, but not listed in this
catalog.
"Screw Installation Kits "
Concrete masonry
"ROTARY CORE "
masonry hammer
5/8" to 6"dia.
12" to 18" lengths.
sds-plus, sds max, standard shank.
Rotary Core Masonry Drill Bits are a carbide
tipped masonry core bit used in standard
rotary drill motors. Rotary Core Masonry
Drill Bits provide an extremely smooth cutting
action and a clean finished hole. Because
of the negative setting of the carbide cutting
teeth, Rotary Core Masonry Drill Bits can
cut through the toughest and hardest of
aggregate in any type of concrete.
The Rotary Core Masonry Drill Bits sizes
5/8" Diameter to 1-3/8" Diameter are milled
from a single piece of steel. Rotary Core
Masonry Drill Bits sizes 1-1/2" Diameter
and over are manufactured with a replaceable
threaded shank
IMPORTANT NOTE:
The Rotary Core Masonry Drill Bits can be
used in any 1/2” capacity or larger drill
motor equipped with a three jaw chuck and
a rated no-load speed of 400 R.P.M. to 1,200
R.P.M.. This includes most combination hammer
drills. When using a combination hammer
drill ensure the selector switch is in the
rotary only position!
"REBAR CUTTER"
masonry/concrete
Will cut through the toughest steel or rebar.
1/2" to 3 " diameters.
12" AND 18 " lengths.
When drilling with a rotary hammer and a
carbide tipped masonry drill bit
(percussion), the masonry drill bit must
be quickly stopped when the masonry drill
bit tip comes in contact with steel reinforcing
bars or wire mesh. (If the tool is not stopped
any carbide-tipped masonry hammer drill
bit will fail.) Using a standard 1/2" chuck
capacity rotary drill with the rebar cutter
inserted into the chuck, place the rebar
cutter into the hole and drill through the
embedded rebar or wire by maintaining an
even and constant pressure. After drilling
through the rebar or wire, remove the debris
from the hole and continue drilling with
the rotary hammer and carbide-tipped masonry
drill bit.
"CONCRETE MILLING CUTTER"
Designed to cut through
concrete and wire mesh or rebar.
1/2" to 6" diameters.4-1/2"dia.
up to 14-3/4 " length.
When are Carbide-Tipped Core Drill Bits
the best alternative to Diamond Core Drill
Bits for a particular application?
In general when evaluating the advantages
of using core drill bits carbide or diamond
drill bits, consider the 80/20 rule. 80%
of applications are suitable for wet diamond
core drill and may not be significantly
improved by utilizing carbide core drill
bits. 20% of applications, require other
alternative solutions and WET/DRY CARBIDE-TIPPED
CORE DRILL BITS offer significant advantages
in such applications. What are these applications?
When encountering applications requiring
core drill bits to drill through multiple
layers of materials stacked together, such
as wood, steel, concrete, rebar and a host
of others material combinations, diamond
drill bits performance can be hindered or
completely prohibited. The Best & Available
alternative is the WET/DRY CARBIDE-TIPPED
CORE DRILL BITS, which are designed to solve
these difficult jobs encountered by the
drilling professional. Can Carbide Core
Drill Bits and Diamond Core Drill Bits work
together? Yes, professional core drillers
in a variety of situations effectively use
both Diamond Drill Bits and Carbide Core
Drill Bits to complete a project. Whether
starting a hole, completing a hole, or anywhere
in between, carbide core drill bits and
diamond core drill bits both make significant
contributions. Example: starting a hole
into concrete only to encounter plate steel
an inch into the hole. Switch to carbide
core drill bits, drill through the steel,
then switch back to the diamond drill bits
until the next hindrance to the diamond
bit is encountered
"PLATE CUTTER"
masonry/concrete
Carbide or Diamond
Designed to cut through concrete
and wire mesh and rebar.
3/8" to 6"dia.
13-1/2 & 24" lengths.
Designed for use in a drill rig, the Plate
Cutter is the ideal choice when a combination
of concrete and steel is being drilled.
Steel plate, embedded rebar, or even wire
mesh, are not a problem for the Plate Cutter.
This series can be used wet with a small
amount of water or even dry. The Plate Cutter
can be completely rebuilt and unlike fragile
diamond drills, the Plate Cutter will with
stand rough usage.
"CRUCIFORM"
1-1/2" to 6"dia.
For the aggressive deep holes!
"RATIO"
masonry/concrete
1/2 to 1-1/2 standard.
Metric 12mm to 35mm. diameters. up to 750mm
lengths.
threads are 1/2-13 pitch
"DIAMOND CORE " CARBIDE & DIAMOND SEGMENTED.
Masonry/Concrete/Rock
wet and dry.
1/2" to 48" diameters.
standard lengths 13-3/4".
SPECIAL LENGTHS AND SIZES CAN BE MANUFACTURED.
 
 
"CORE RIGS "
&
GAS POWERED MOTORS.
for masonry/concrete
To fit any application!
 
"FORGED HAMMER "
MASONRY / ASPHALT
SDS PLUS*SDS MAX* SPLINE AND ROUND SHANK
COUNTER BORES masonry/asphalt/concrete
2" diameter.
special sizes, custom manufactured.
Railroad tie counter bore are used to anchor
concrete railroad crossing pads to their
underlying wooden cross ties using a trox
bolt ® head type anchor bolt. The Trox bolt
head must be installed below the surface
of the concrete to prevent damage to vehicle
tires. In colder climates where snow removal
is necessary, this trox bolt ® countersinking
process prevents snowplow blades from shearing
off the bolt head. Railroad tie counter
bore, a masonry counter bore, countersinks
a two-inch hole into concrete which was
a difficult procedure until the advent of
the railroad tie counter bore masonry counter
bore. Powered by an electric, hydraulic,
or air powered rotary/percussion hammer,
railroad tie counter bore allows the operator
to countersink any trox bolt head to the
proper depth quickly and easily!
We also manufacture specialty masonry
tooling
for special jobs.
All diameters and lengths.
Continuous, Turbo, and segmented
Masonry/Concrete/ Diamond Blades
 
MORE DIAMOND
BLADES
SDS Plus / SDS Max / Spline
A and B Tapered / ratio / hex
masonry tools.
Standard, Metric and More.
(More Quality Bits and Tooling)
Metals Glass Woods Fiberglass Porcelain
Composites
Concrete Tile Timber Stone Welding Alloys
for All Industry and Individuals.
Many types of tooling available.
A/B Taper shank, masonry, concrete, sds/MAX
shank, sds PLUS shank, tapcon,
spline shank hammer, milling cutters. plate
cutters, rebar cutting, cruciform tools.
For over thirty one years Advantage Drills
Inc", has been an industry innovator and
leader in design, production, and distribution
of masonry, concrete, stone, asphalt, and
demolition tooling. Our basic business principles
are to use the highest and best quality
materials, the most updated manufacturing
technologies and equipment. Acquire the
best engineers, and strive to give you the
best possible service, both in information
and technical support. We assure you of
the best products and best Service available!
"Advantage Drills Inc."
We guarantee the lowest prices and best
quality!
E mail or Call Us!
Phone:(407)478-2487 BITS
Fax:(407)678-7414 ( 24 hrs )
(9:00 AM TO 5:00 PM EST)
Home
other links masonry.
wikipedia.
Definitions
Masonry, concrete, sds/PLUS shank, sds/MAX
shank, spline shank hammer, A/B Taper shank,
sds/MAX hammer, sds, MASONRY, sds bits,
sds max, sds/max, sds/plus, long masonry,
tapcon, tapcons, spline milling cutters,
plate cutters, rebar cutting, cruciform
tools, masonry bits concrete, tapcon masonry
bit, sds bits, spline drive, sds plus, sds
max bits, sds max, SDS, sds carbide, sds
plus bits, sds max tapcon, anchor bits,
sds/ plus bits, spline concrete milling,
stucco, SDS-plus bit, spline, sds, plus,
sds bits
|
